Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
A sewer is a municipal facility, the pipework that carries sewage and rainwater away from buildings. Steel grating trench covers, with high load capacity, large drainage capacity and a long service life from hot-dip galvanizing, are widely used in urban drainage works. In practice, however, when the grating is joined to the sewer manhole opening, many gaps remain between the grating and the opening, so existing steel grating trench covers are poorly fixed, ...

Design and installation requirements for grating stair treads. Technical requirements for grating stair treads: 1. Stair width should preferably be 700mm, no more than 1100mm and no less than 600mm. 2. Stair height should preferably not exceed 5m; where it exceeds 5m, an intermediate landing should be provided and the stair split into sections.

The stair treads we touch and use in daily life are very durable, and such plates are installed by either welding or anchor-bolt fixing. So what materials are stair treads made from? There are now many types of stair tread, and different types differ in their choice of materials and manufacturing processes, so installing and using these plates ...

Serrated steel grating is welded from flat bars with one serrated edge. In addition to the features and uses of ordinary steel grating, it offers stronger slip resistance, making it especially suitable for damp, greasy locations and offshore oil platforms. With hot-dip galvanized surface treatment it has strong rust resistance and needs no maintenance or replacement for 30 years, but it is relatively expensive, so consider the cost when purchasing. Serrated steel grating uses high-strength carbon steel, giving very high strength ...

Galvanized steel grating is a steel plate product in which flat bars and cross bars are arranged crosswise at a set pitch and welded into square mesh. It is mainly used for trench covers, steel structure platforms and steel stair treads. Cross bars are generally twisted square bars. The grating is usually made of carbon steel, and hot-dip galvanizing the surface prevents oxidation. Stainless steel can also be used. 1. Specifications of galvanized steel grating: (1) Bearing bar pitch: two adjacent ...
