Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
When buying steel grating products, users are often at a loss because of the many types and complex specifications. 1. Load capacity: the main function of steel grating is to bear loads, and the main factor affecting it is the specification of the flat bearing bar - the larger the bar, the higher the load capacity, and correspondingly...

During use, dirt should be cleaned regularly from the surface of galvanized steel grating. Once the zinc layer is damaged, the grating corrodes quickly and gradually fails, especially in chemical plants and in strong acid or alkali conditions that readily attack the zinc coating. The corrosion resistance of galvanized steel grating itself is not high, so protecting the surface zinc layer is the top priority in maintenance; secondly, its hardness varies with the material...

Steel grating is versatile and widely used: 1. It can be made into suspended ceilings. Built on a steel grating design, the whole structure is relatively light and attractive, with relatively high strength; installation is simple, and the zinc-coated surface gives fairly good corrosion resistance with no maintenance...

Steel grating fixing methods: either welding or fastening with installation clips. Welding gives a permanent fix that will not work loose; installation clips do not damage the hot-dip zinc coating and allow easy removal. The safest method is to omit the lower clip and weld the screw head upside down onto the beam, ensuring the grating cannot slide off if a clip loosens. Steel grating exposed to air or submerged in water for long periods without effective protection will rust on the surface...

Thanks to its light structure, high strength and easy installation, steel grating is widely used in shipbuilding for engine and boiler passages, deck walkways, maintenance routes and platforms. The standard for marine steel grating is YB/T4001.1-2007, and marine grating is commonly made with 32*3, 40*3 and 50*5 flat bearing bars. Depending on the environment and application, marine grating is also often produced in stainless steel and aluminium alloy. Marine steel grating...
