Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
What causes the zinc coating to peel off steel grating? Improper galvanizing of steel grating can cause the zinc layer to flake off. The causes can be addressed in three aspects: improving the surface cleanliness of the base plate, ensuring atmosphere control in the furnace, and ensuring complete reduction of the grating base material, so as to improve galvanizing quality and guarantee the service performance of the grating.

Hot-dip galvanized grating is now widely used and fundamentally solves the problem of traditional metal, wood and plastic products corroding and failing easily. Can it withstand prolonged sun exposure? Preferably not: because UV resistance is only moderate, long-term exposure to sunlight causes the surface resin to degrade and exposes the internal glass fiber material, which affects the overall appearance of the product but does not affect its strength...

Stainless steel grating is one type of steel grating, but it differs from ordinary grating in a few ways. First, in material: stainless steel grating is made of stainless steel, while ordinary grating is made of carbon steel or stainless steel. Second, the surface of stainless steel grating is not spray-painted or hot-dip galvanized for corrosion protection; instead it is polished to remove welding slag and weld marks produced during fabrication...

Design loads for steel grating platforms and walkways 1. For single-operator work platforms, the design load is generally 1.5kN distributed over the whole 200mm x 200mm area. 2. Maintenance platforms are generally designed for a uniformly distributed load of 4kN/m2.

What has been added to YB/T4001.1-2019 compared with the 2007 standard? The main technical changes relative to the old standard are as follows:
