Anping, Hebei · China's Wire Mesh Capital | APG Steel Grating — Direct Manufacturer of Hot-Dip Galvanized Steel Grating Instant QuoteSitemap

Steel Grating · Stair Treads · Covers

  • 20-Year Manufacturer
Industry News · Standard Interpretation

Steel Grating Standards & Technical Insights

Industry News · Technical Support · Product Cases

A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.

WhatsApp & E-mail support | Free sizing & quotation

  • Palletized hot-dip galvanized steel grating panels packed for shipment
  • Stacked hot-dip galvanized steel grating panels in factory yard
  • Double-tier galvanized steel grating stair treads with nosing
Contact Us

Steel Grating Factory

Address: East Industrial Park, Anping County
WhatsApp: +86 133 2318 8871
E-mail: [email protected]

Features of Chicken Cage and Pigeon Cage Mesh

Published: 2021-06-19Popularity: 115

This article introduces steel grating in the order of features of chicken cage mesh and pigeon loft mesh, material and corrosion requirements, and basic concepts, giving practical judgement methods wherever possible. If you only need a quick conclusion, read the key points at the start of each section; the same approach applies to hot-dip galvanized steel grating.

Key Points on the Features of Chicken Cage Mesh and Pigeon Loft Mesh

The following aspects most need to be confirmed in advance in actual procurement and use:

53.jpg

     To provide chickens and pigeons with a comfortable, safe, clean, environmentally friendly and well-ventilated space

The above points can serve as a pre-purchase checklist; confirm each item before moving to the quotation stage.

Quotations for the same specification may fluctuate with the steel market between batches - normal for steel products like steel grating. If the procurement schedule allows, lock in prices early; the procurement of galvanized grating can be planned on the same rhythm.

Material and Anti-Corrosion Requirements

Common materials and surface treatments are as follows:

     This product is made from polyester profiles and low-carbon steel, and features corrosion resistance, ageing resistance, flame retardancy, non-magnetic insulation, impact resistance, anti-slip performance, an attractive appearance, high safety, easy installation and easy cutting.

Once material and surface treatment are decided, we recommend writing zinc coating thickness and appearance requirements into the technical agreement.

Regarding corrosion protection, one thing is easily overlooked: on-site cutting and welding damage the original coating, and these areas need zinc touch-up after construction, otherwise rust often starts from the cut edges. Hot-dip galvanized steel grating has the same issue; it is best to include this in the technical requirements at the construction disclosure.

Performance Features of Chicken Cage Mesh and Pigeon Loft Flooring

ItemDescription
Corrosion resistanceIt offers excellent resistance to acids, alkalis, organic solvents, salts and many other gaseous and liquid media, giving unmatched advantages in corrosion protection. Depending on the actual application, orthophthalic, isophthalic or vinyl ester polyester can be chosen economically as the matrix material.
Light weight, high strengthThe density of polyester grating is about 1.8, only 1/4 that of steel and 2/3 that of aluminium. Its strength is 10 times that of rigid PVC, and exceeds that of aluminium and ordinary steel.
Ageing resistanceService life exceeds 50 years.

1111236.jpg

ItemDescription
Flame retardancyThe flame spread rate of standard flame-retardant grating (ASTME-84) does not exceed 25; flame-retardant vinyl ester grating does not exceed 10. The oxygen index is not less than 28 (GB8924).
SafetyIt has excellent electrical insulation with no breakdown at 10KV, is non-magnetic and can be used near magnetically sensitive equipment; the special structure of FRP grating also provides anti-slip and fatigue-resistant properties.
Environmental performanceExcellent environmental credentials, in line with current calls for greener products - environmental protection starts with everyone.

On material selection, simply chasing a higher grade is not recommended. The material used for steel grating should match the load requirement and service environment; over-specifying adds unnecessary cost. The corresponding treatment of galvanized grating can be found on the product page and chosen against actual working conditions.

Further reading: Sizing reference for hot-dip galvanized steel grating and galvanized grating

Besides what this article covers, hot-dip galvanized steel grating is also common in actual projects. It shares similarities with this article's subject in structure and fabrication; for selection, check span, load and service environment in the same order. If both types of components are used in the same project, we recommend unifying material and surface treatment to avoid later galvanic corrosion or inconsistent appearance.

FAQ

What is most often overlooked during installation and acceptance?

First, bearing bars installed in the wrong direction reduce load capacity; second, insufficient fixing points or missing zinc touch-up paint; third, support beam spacing inconsistent with the layout drawing. These three items are most often overlooked on site.

Where can I find specific specifications?

our websiteProductsCommon specifications and theoretical weights are organized by series, also available in Instant Quote PageEstimate by size, or contact us directly for sizing advice.

How to choose between hot-dip galvanizing and cold galvanizing?

The two anti-corrosion mechanisms differ: hot-dip galvanizing immerses steel in molten zinc to form a metallurgically bonded coating, thick and long-lasting, suitable for outdoor and humid environments; cold galvanizing is electrochemical deposition with a thinner, more uniform appearance, suitable for dry indoor environments or applications requiring high dimensional precision.

The above is for sizing and construction reference. To verify specific parameters or request a quotation, please visitInstant Quote Page, or contact our technical staff.

The above is general guidance. For a specific project, we still recommend submitting span, load class and service environment to our technicians for review. Steel grating is a load-bearing component; rework caused by wrong specification choices costs far more than the time spent on upfront calculation.

How do you like this article?

0 0

Related Products