Anping, Hebei · China's Wire Mesh Capital | APG Steel Grating — Direct Manufacturer of Hot-Dip Galvanized Steel Grating Instant QuoteSitemap

Steel Grating · Stair Treads · Covers

  • 20-Year Manufacturer
Industry News · Standard Interpretation

Steel Grating Standards & Technical Insights

Industry News · Technical Support · Product Cases

A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.

WhatsApp & E-mail support | Free sizing & quotation

  • Palletized hot-dip galvanized steel grating panels packed for shipment
  • Stacked hot-dip galvanized steel grating panels in factory yard
  • Double-tier galvanized steel grating stair treads with nosing
Contact Us

Steel Grating Factory

Address: East Industrial Park, Anping County
WhatsApp: +86 133 2318 8871
E-mail: [email protected]

Different galvanized steel grating specifications for different sites

Publication date: 2020-06-25Popularity: 145

Many projects focus only on price when purchasing galvanized steel grating, overlooking specification matching and anti-corrosion requirements, which leads to rework later. This article lists the conditions to confirm, in the order of applications of different hot-dip galvanized steel grating specifications, typical application scenarios, and key conditions for selection, and explains how to weigh common conditions; content related to galvanized grating can serve directly as a reference for technical disclosure.

20190405162153402_634.jpg

Applications of hot-dip galvanized steel grating of different specifications

Common specifications and corresponding parameters are summarized below; confirm each item before ordering:

     Steel grating is widely used in daily life, not only on construction sites but also on decorative buildings, so we see all kinds of steel grating products. Steel plate is used for planning and manufacturing steel structures.

QQ Image 20191104113549.jpg

    For example: DG255/30/100 means cross bar center pitch 100mm; bearing bar center pitch 30mm; bar thickness 5mm; bar width 25mm.    

    In addition, the letter 'S' can be added after the specification for serrated steel grating, or 'I' for I-type steel grating; both can be used together for I-type serrated steel grating. 

    For example: DG325/30/50I means cross bar center pitch 50mm; bearing bar center pitch 30mm; and an I-type bar 32mm wide. 

timg (14).jpg

  Common bars include 255, 303, 305, 404, 405, 505. When used for stair treads, the most common tread specification is 255/30/100. Common sizes include 20*5, 25*5, 25*3, 32*5, 30*5, 40*5, 40*3, 50*5, 65*5, 75*6, 100*8, 100*10, etc.

  • Heavy-duty hot-dip galvanized steel grating welded from bars 65mm-200mm wide and 5mm-20mm thick is heavy-duty steel grating, also called heavy steel grating, suitable for large freight yards, docks, coal mine roads, and bridges, able to carry large trucks.
  • Hot-dip galvanized steel grating (40mm bearing bar pitch): grating with 40mm bearing bar pitch is an economical, lightweight type, an ideal choice for shorter spans.
  • Hot-dip galvanized steel grating (60mm bearing bar pitch, 50mm cross bar pitch) is suitable for mining and solves the problem of mineral spillage on the panel surface; it is often specified for mining processing plants.

1111236.jpg

4. Hot-dip galvanized steel grating (30mm bearing bar pitch) is the most widely used type in industry. Among common hot-dip galvanized steel grating series, it offers strong resistance to surface impact.

5. Hot-dip galvanized steel grating (I-type bars) welded from I-type bars is lightweight with high load capacity, suitable for various settings, especially walkways and viewing platforms.

Hot-dip galvanized steel grating has a simple appearance; hot-dip galvanizing lasts long without paint protection. It is widely used for ceilings in tobacco production, industrial plants, large stadiums, convention centers, large commercial buildings, stations, docks, airports, and other civil and industrial buildings.

The above are common specifications; actual ordered dimensions and tolerance requirements shall be confirmed against the layout drawing.

A practical tip for confirming specifications: write the bar size, bearing bar pitch, cross bar pitch, and overall dimensions into the purchase list together; specifying only one or two items often leads to mismatched deliveries. The full specification notation for galvanized steel grating is compared on the products page; number and check each piece against the layout drawing before ordering, and the same applies to hot-dip galvanized steel grating.

Typical Applications

Typical applications mainly include the following categories, which can help you judge suitability for your project:

  • Industrial Platforms & Maintenance Walkways: equipment platforms and inspection passages in power plants, chemical plants and steel-structure workshops;
  • Municipal & Landscape: road drainage trench covers, rainwater grates, tree grates, park boardwalks;
  • Transportation & Ports: wharf trestles, multi-story parking garage lanes, railway bridge walkways;
  • Environmental & Water Treatment: walkways in wastewater treatment plants, tank platforms, screening machine platforms;
  • Others: elevated tower platforms, stair treads, fences and railings, etc.

If your working conditions fall outside the above range, you can provide site photos and dimensions, and our technicians will help assess them.

Different parts of the same site often have different requirements. For example, with galvanized steel grating, main walkways and corner areas, or heavily used areas and occasional maintenance areas, can have different specifications; paired use of galvanized grating should also be planned by zone, balancing safety and cost.

Key Conditions to Confirm During Selection

Items to confirm before procurement are as follows:

  • First clarify the span and support beam spacing to determine the required series;
  • Then check load requirements by usage type (pedestrian, maintenance, vehicular);
  • Finally, determine the surface treatment by service environment (dry indoor, outdoor, coastal, chemical).

Placing the order after confirming these items effectively avoids specification mismatch and on-site rework.

Bigger is not always better. The selection of galvanized steel grating should be as economical as possible while meeting load requirements; over-thickening increases self-weight and cost and complicates installation. The product page offers a fuller comparison for galvanized grating; refer to it before deciding.

Further reading: Selection points for galvanized grating and hot-dip galvanized steel grating

In engineering, hot-dip galvanized steel grating is often used together with the components mentioned in this article. The two differ in load carrying and installation practices; when combining them, pay special attention to the connection of support conditions and fixing methods, as junction treatment is often where problems arise. For unified drawings, submit dimensions of both types and our technicians will process them under the same layout logic.

FAQ

Where can I find specific specifications?

our websiteProductsCommon specifications and theoretical weights are organized by series, also available in Instant Quote PageEstimate by size, or contact us directly for sizing advice.

What maintenance is required during daily use?

Maintenance mainly involves periodically checking whether fasteners are loose, whether touch-up paint has peeled off, and whether the panel surface shows obvious deformation or rust. Issues found should be dealt with promptly; overall maintenance is minimal.

How to choose between hot-dip galvanizing and cold galvanizing?

The two anti-corrosion mechanisms differ: hot-dip galvanizing immerses steel in molten zinc to form a metallurgically bonded coating, thick and long-lasting, suitable for outdoor and humid environments; cold galvanizing is electrochemical deposition with a thinner, more uniform appearance, suitable for dry indoor environments or applications requiring high dimensional precision.

The above is for sizing and construction reference. To verify specific parameters or request a quotation, please visitInstant Quote Page, or contact our technical staff.

If you already have drawings or site dimensions, submit them directly and we will help verify specifications and layout, avoiding on-site cutting and rework caused by mismatched models. Without drawings, site photos and approximate dimensions are enough for an estimate.

How do you like this article?

0 0

Related Products