Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
Finished steel grating from our factory in Anping County, Hebei Province is generally bundled with steel straps. The following points should be noted when bundling: 1. Number, arrange and group the galvanized grating products according to the order contract or order drawing and the position of each panel on the drawing.

1. In the Steel Grating Standard YB/T4004--1998, clause 7.2 defines the method for calculating grating area. 1.1 Where there is no drawing and the grating is made to the user's specified dimensions, the area is the sum of the quantity of delivered grating multiplied by width and by length, including openings and cut-outs.

Press-locked steel grating comes in two types: full-insert grating and half-insert grating. It is made from plain carbon flat bars, stainless steel, brass plate or aluminum plate of set sizes through slotting, interlocking, welding and finishing. Full-insert grating is formed by slotting grating of the same specification and interlocking them, and is lightweight, high-strength, corrosion-resistant, maintenance-free and attractive. Press-locked grating is widely used in civil and commercial buildings, theaters, subways and urban rail...

I. Terms and definitions for stair treads 1 Fixed steel inclined ladder: a tread stair permanently installed on a building or equipment at an inclination of 30°~75° to the horizontal. 2 Stringer (stile / rail)

Steel grating (grating panels) 1. It is generally made of carbon steel, with the surface mostly hot-dip galvanized or cold galvanized; galvanizing prevents oxidation and improves corrosion protection. It can also be made of stainless steel. 2. Steel grating provides ventilation, daylighting, heat dissipation, anti-slip and explosion-proof performance. Its surface can be serrated (serrated steel grating) to increase anti-slip performance. Bearing bars can also be I-shaped or flat.
