Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
What steel grating specifications are available? Common specifications include G253/30/100, G255/30/100, G253/40/100, G255/40/100, G253/30/50, G255/30/50, G303/30/100, G305/30/100, G305/40, 100, G305/30/50, G323/30/100, G323/40/100, G323/30/50, G325/30/100, G325/30/50, G403/40/100, G404/30/100, G505/30/100, G505/30/50, ...

As Spring Festival approaches, we are thanking new and old customers with special discounts on steel grating ordered before the holiday, at the lowest cost price. Friends planning to use steel grating after the holiday are welcome to order now: 13323188871.

Steel grating is slip-resistant: flat bars and twisted square cross bars are cross-welded to give good anti-slip performance, and grating made with serrated flat bars and twisted square bars is more slip-resistant than flat-type grating. It does not collect water or snow in rain or snow, offers good ventilation and high safety, and is especially suitable for damp, greasy places and offshore oil platforms. I. Serrated steel grating is welded from serrated flat bars and has strong slip resistance...

In steel grating the flat bars carry the load, while the twisted square cross bars mainly support the flat bars and contribute little load capacity. The flat bars are generally perpendicular to the steel beams. The length of the grating refers to the direction of the bearing bars, while the width is the dimension measured along the cross bars (usually twisted square steel). This must be strictly and clearly specified when ordering. Both ends of the grating in the length direction (the bearing bar direction) must be supported, i.e. rest on bearing beams...

Drainage trench grate, also called grating trench grate, is a steel product made by arranging flat bearing bars and cross bars crosswise at set pitches and welding them into a panel with square mesh openings. It is mainly used for trench covers, steel structure platform decks and steel stair treads, etc. The cross bars are generally twisted square steel. Grating trench grates are usually made of carbon steel and hot-dip galvanized to prevent oxidation, and can also be made of stainless steel...
