Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
I-section steel grating is made by arranging I-shaped bearing bars and cross bars at set pitches, welding them into a raw panel on a high-pressure resistance welder, then cutting, trimming, punching and edging to the customer's required finished product. Features: high strength and light structure - the firmly pressure-welded grid gives high load capacity with a light structure that is easy to lift; attractive and durable - the hot-dip galvanized finish gives good corrosion resistance...

Steel cover plate: a steel cover plate combines steel grating with a certain spanning capacity and a checkered plate that seals the surface. After hot-dip galvanizing, thermal stress can cause warping, especially with larger grating sizes that are difficult to flatten, so take care in selection. Steel cover plates usually use Series 3 grating as the base, though Series 1 or Series 2 may also be used; checkered grating commonly uses 3mm plate, or 4mm, 5mm, 6m...

Tree grating, also called tree pit steel grating, is designed and made from steel grating panels, formed by two or four symmetrical sections butted together with a tree opening at the centre. It is mainly used in tree pits along streets to prevent soil erosion and improve the landscape. Tree pit steel grating is an ideal choice for landscaping in parks, factories, streets and scenic areas. The cross bars of press-locked grating generally have a certain...

When purchasing steel grating, you need to give the manufacturer the mesh opening and the bearing bar width and thickness, for example G255/20/100, G323/30/100, G305/30/100; the standard size is 1*1 m, but custom sizes can be made. Provide the required site dimensions to the manufacturer, who will produce to the buyer's sizes. One more important point: the load-bearing direction of the flat bars must be clear and must not be reversed, or the load capacity of the grating will be reduced...

Simply put, galvanized steel grating can be reused. Stair treads, for example, are bolted and can be removed and used many times, and platform steel grating can also be reused after dismantling. But if dimensions need to change, modifying galvanized grating is troublesome: the zinc layer must first be stripped, then the panel modified and galvanized again, at somewhat higher cost. We have also seen grating cut and welded directly on site; in such cases the user is less particular, using...
