Anping, Hebei · China's Wire Mesh Capital | APG Steel Grating — Direct Manufacturer of Hot-Dip Galvanized Steel Grating Instant QuoteSitemap

Steel Grating · Stair Treads · Covers

  • 20-Year Manufacturer
Products · 8 Major Series

Full Range of Hot-Dip Galvanized Steel Grating in Stock

Steel Grating / Stair Treads / Trench Covers / Compound Grating - One-Stop Purchase

Full range of steel grating covering welded, press-locked, compound, serrated, I-type and more, with custom shaped fabrication and hot-dip galvanizing. In stock and ready to dispatch, with free sizing & quotation.

WhatsApp & E-mail support | Free sizing & quotation

  • Serrated hot-dip galvanized steel grating panel close-up
  • Plain hot-dip galvanized steel grating panel
  • Galvanized steel grating stair tread with checker plate nosing

Steel Stairs

Published: 2019-10-17Popularity: 129

Steel stair treads are used as the stepping surface of steel stairs and maintenance stairways, with anti-slip performance, firmness and dimensional fit as the core requirements. This page explains stringer spacing, anti-slip form, end connection and quantity take-off item by item, and gives recommendations for different service environments. The same approach applies to steel stair treads.

Items to Confirm When Selecting Steel Stairs

This page does not list a fixed specification table, as such products are usually custom-fabricated to site conditions. We recommend confirming each item in the table above before inquiry: once mismatched with actual site conditions, refabrication is often required later.ProductsCommon specifications are organized by series for reference.

Items to ConfirmWhat Needs to Be ClarifiedCommon Practices
Stringer SpacingClear distance between the two stringersDetermines the load-bearing length of the tread
Tread DimensionsWidth and length, whether end plates are includedDetermine by actual stair dimensions
Anti-Slip TypeSerrated bearing bars or anti-slip raised patternsRequired for oily, wet or outdoor environments
Quantity SummaryNumber of steps and matching side platesCount by actual number of steps and reserve spares
Load RequirementsSingle-person traffic or multi-person/with goodsVerify by actual service conditions
End TreatmentWhether banding and anti-slip nosing are neededEnd banding and anti-slip nosing recommended

Key Points for Steel Stairs

Regarding steel stairs, the following points are most often asked about in purchasing and use, and most need to be confirmed in advance:

20190405100205714_125.jpg

Steel Stairs

The above points can serve as a pre-purchase checklist; confirm each item before moving to the quotation stage.

Installation and Fixing Method

The most common problems during installation lie in the fixing method and the orientation of the bearing bars. The key installation points for steel stairs are as follows; check them one by one before construction:

Steel stairs are made by welding grating stair treads to keels or channel steel, or they can be bolted together.

After installation, check each panel's fixing points and flatness; put into use only after confirming no warping or looseness.

Steel Stair Treads

For more details on steel stairs, refer to the following items and compare them one by one against site conditions:

Steel stair treads are a further-processed product made by combining steel grating with anti-slip strips and side plates. They are mainly used as steps on steel stairs, so they are usually called stair treads, or tread plates for short.

Steel stair tread specifications: steel stair treads need to be made in various sizes to match the corresponding staircase, but for economy and safety we recommend the following specifications:

T325/30/100 (for stair treads with width over 215mm and not over 305mm)

T255/30/100 ((for stair treads with width over 215mm and not over 305mm)

The above points can serve as a pre-purchase checklist; confirm each item before moving to the quotation stage.

Steel Stair Treads

For more details on steel stairs, refer to the following items and compare them one by one against site conditions:

Also known as stair treads, they fall into two types by installation method: welded and bolted. Treads welded directly to the joists without added side plates are relatively economical and durable but hard to dismantle. Bolted treads need thicker side plates on both sides with holes drilled in them; they are fixed directly with bolts and can be reused after removal.

 Steel stair treads of various specifications can be custom-made to user needs; any type of steel grating can be made into various sizes to fit the corresponding stairs, but for economy we recommend using our recommended dimensions wherever possible.

Our steel stair treads come in four forms, T1, T2, T3 and T4, classified by presence of nosing and connection to stringers.

1. For economy, we recommend using modular widths wherever possible (Series 1: 125, 155, 185, 215, 245, 275; Series 2: 125, 165, 205, 245, 275mm, etc.) and lengths in multiples of 100mm (e.g. 500, 600, 700, 800, 900, 1000, 1200mm, etc.).

timg (5).jpg

2. Steel Stair Tread Tolerances: Width W±3mm, Length L-3mm.

In addition, we offer stair treads with different anti-slip nosings, whose dimensions can be specified as needed. We generally recommend the following nosing dimensions.

Steel stair treads are fabricated from steel grating (steel grating is a steel product made by cross-arranging flat bars at set pitch with cross bars and welding them into a grid with square openings). The surface is usually hot-dip galvanized or electro-galvanized. Steel stair treads are mainly used for industrial platforms, stair treads, handrails, walkway floors, railway bridge walkways, elevated tower platforms, trench covers, manhole covers, road gratings and multi-story parking, and as fencing for institutions, schools, factories, enterprises, sports fields and garden villas; also for residential windows, balcony railings, and highway and railway fences. Stair treads are a deeply processed product combining steel grating with anti-slip nosings and side plates. They are mainly used as steps on steel stairs, hence commonly called stair treads, or simply treads.

Specifications: Steel stair treads need to be made in various sizes to fit the corresponding stairs, but for economy and safety we recommend the following specifications:

T325/30/100 (for stair treads with width over 215mm and not over 305mm)

T255/30/100 (for stair treads with width over 215mm and not over 305mm)

The above points can serve as a pre-purchase checklist; confirm each item before moving to the quotation stage.

Types of Steel Stair Treads

For easy comparison, steel stairs are listed below one by one by common classification, with their respective applications:

(1) By installation, steel stair treads are divided into welded and bolted types. Welded treads are simply steel grating; bolted treads require 65X5mm flat bars added as side plates.

(2) By anti-slip requirements, steel stair treads are divided into those with nosings (checkered plate or strip steel) and those without. For safety reasons, we recommend treads with nosings.

Determine the category first and then the specific model; this saves detours and makes comparison with other materials easier.

Key Points for Selecting Steel Stairs

Confirm each item in the order below during selection to avoid most later rework. Record the conclusion of each step and submit it with your inquiry:

  • Step 1 · Confirm Stair Stringer Spacing and Tread Width: The actual load-bearing length of the tread depends on stringer spacing; the width can be set per common traffic requirements.
  • Step 2 · Confirm Anti-Slip Requirements: For stairs with oil, standing water or outdoor exposure, serrated bearing bars or anti-slip raised surfaces are recommended.
  • Step 3 · Confirm End Connection Method: Including the welded or bolted connection form with stringers, and whether banding and end closure plates are needed.
  • Step 4 · Confirm Quantities and Accessories: Count by the actual number of steps, and check whether anti-slip nosings, side plates and fasteners are needed.

Once the above conditions are confirmed, proceed to Instant Quote PageEstimate quantities by dimensions, or send the condition list to customer service for model recommendations from our technicians.

Steel Stair Application Conditions Comparison

The same specifications last very differently in different environments. The table below gives recommended practices by common service environment for your selection reference:

Operating EnvironmentRecommended PracticesNote:
Outdoor and Open-Air EnvironmentsHot-dip galvanized surface treatment recommendedCheck zinc coating integrity and re-zinc cut edges
Humid or Water Treatment EnvironmentsUse a higher corrosion protection grade with matching fastenersRegularly inspect fixing points and surface corrosion
Pedestrian and Maintenance WalkwaysChoose standard series, balancing walking comfortFocus on surface flatness and end banding
High-Temperature or Large Temperature-Difference EnvironmentsSelect material and connection method by temperatureWatch for loosening caused by thermal expansion and contraction
Clean Rooms and Food & PharmaceuticalPrioritize surface treatment and cleaning convenienceAvoid dust-collecting structures and cleaning dead corners
Temporary or Short-Term UseCan be configured with the light-duty seriesFor short schedules, prioritize easy disassembly and turnover

Custom Fabrication & Quotation

Before ordering, we recommend providing site photos, trench or platform dimensions and traffic requirements together, so we can give the model and layout plan in one go and reduce on-site cutting and rework. Common specifications are usually in stock; lead times for shaped parts and bulk orders depend on specification and quantity. For reference on similar projects, seeProject Cases; for a quotation, go directly to Instant Quote Page.

FAQ

Can it be custom-made to site dimensions?

Yes. Bearing bar specs, pitch, panel dimensions and banding forms can all be custom-made to drawings; cutouts, corner notches and shaped cutting are also supported. For bulk orders, a layout drawing can be confirmed before production.

What Are the Common Specifications of Steel Stairs?

Common specifications are determined by combinations of bearing bar width and thickness, bearing bar pitch, and cross bar pitch; different combinations correspond to different load capacities and theoretical weights. Our Products section lists common models by series; you can also send span and load requirements to customer service for sizing help.

Which surface treatment should I choose?

Hot-dip galvanizing is recommended for outdoor or humid environments; for dry indoor environments, untreated or painted is fine; coastal, chemical and other strongly corrosive environments need thicker zinc coatings or stainless steel, depending on the expected service life.

Once the specifications and surface treatment of the steel stairs are confirmed, a quotation can be provided. For made-to-drawing customization or load calculation, please contact us viaInstant Quote PageSubmit dimensions, or contact us directly for technical support.

Related News