Anping, Hebei · China's Wire Mesh Capital | APG Steel Grating — Direct Manufacturer of Hot-Dip Galvanized Steel Grating Instant QuoteSitemap

Steel Grating · Stair Treads · Covers

  • 20-Year Manufacturer
Products · 8 Major Series

Full Range of Hot-Dip Galvanized Steel Grating in Stock

Steel Grating / Stair Treads / Trench Covers / Compound Grating - One-Stop Purchase

Full range of steel grating covering welded, press-locked, compound, serrated, I-type and more, with custom shaped fabrication and hot-dip galvanizing. In stock and ready to dispatch, with free sizing & quotation.

WhatsApp & E-mail support | Free sizing & quotation

  • Serrated hot-dip galvanized steel grating panel close-up
  • Plain hot-dip galvanized steel grating panel
  • Galvanized steel grating stair tread with checker plate nosing
You are here: Home > Products > Steel Grating

Welded Steel Grating

Published: 2019-10-16Popularity: 126

20190405094833761_169.jpg

Welded steel grating is a widely used steel grating product in industry and municipal engineering; steel gratings are a common term for the matching or same-series products. This page explains specification reading, material and surface treatment, suitable working conditions, installation and fixing, and customization and quotation item by item. If you already have drawings or site dimensions, check them directly against the items; you can also go toInstant Quote Page to estimate quantities.

Items to Confirm for Welded Steel Grating Selection

This page does not list a fixed specification table, as such products are usually custom-fabricated to site conditions. We recommend confirming each item in the table above before inquiry: once mismatched with actual site conditions, refabrication is often required later.ProductsCommon specifications are organized by series for reference.

Items to ConfirmWhat Needs to Be ClarifiedCommon Practices
Span and SupportClear span between support beams and support surface widthDetermine by field-measured dimensions
Material RequirementsCarbon steel or stainless steel, grade requirementsDetermine by corrosion grade of service environment
Surface TreatmentHot-dip galvanized, painted, or untreatedHot-dip galvanizing recommended for outdoor and humid environments
DimensionsPanel length and width, whether openings or notches are neededCustom fabrication per layout drawing
Fixing MethodWelded fixing or special clipsRemovable covers recommended for positions requiring maintenance
Acceptance RequirementsAcceptance Criteria for Flatness, Tolerances and AppearanceRecommended to specify in the technical agreement

Welded Steel Grating

For more details on welded steel grating, refer to the following items and compare them against site conditions one by one:

 Welded steel grating is a steel grating product made by arranging flat bars at certain spacing crossed with cross bars and welding them into square-mesh panels, featuring high strength, light structure and easy hoisting; attractive appearance and durability. Its surface is hot-dip galvanized for better corrosion resistance!

The above points can serve as a pre-purchase checklist; confirm each item before moving to the quotation stage.

Welded Steel Grating Specifications

The specification parameters of welded steel grating mainly consist of bearing flat bar size, bearing bar pitch, cross bar pitch and overall panel dimensions; confirm each item before ordering. Common parameters are compared as follows:

        Bearing bar pitch: 30, 40, 60mm, etc.; recommended:  30, 40mm.

        Cross bar pitch: 30, 38, 50, 76, 100mm; 50 and 100mm are recommended.

        Dimensions: commonly 6x6mm twisted square bars; small-size galvanized steel grating uses 5X5mm twisted square bars; stainless steel commonly uses 5mm round bars.

        Bearing bar pitch: the center distance between two adjacent bearing bars, commonly 30mm or 40mm.

        Cross bar pitch: the center distance between two adjacent cross bars is usually 50mm or 100mm; other pitches can be produced on request.

20191014214603715.jpg

The above are common specifications; actual ordered dimensions and tolerance requirements shall be confirmed against the layout drawing.

Welded Steel Grating Types

For easy comparison, the common classification of welded steel grating is listed below one by one, with the application of each type:

Determine the category first and then the specific model; this saves detours and makes comparison with other materials easier.

Depending on bearing bar type, hot-dip galvanized steel grating is mainly divided into the following three types

The material of welded steel grating directly determines load capacity and corrosion resistance and is the key factor of service life. Material grades of flat bars and cross bars and surface treatments are generally selected as follows:

ComponentMaterial and Specifications
Flat TypePlain hot-dip galvanized steel grating is the most widely used hot-dip galvanized steel grating, mainly for platforms, walkways, various trench covers and stair treads.
SerratedCompared with plain hot-dip galvanized steel grating, serrated galvanized steel grating provides better anti-slip performance.
I-ShapeCompared with plain hot-dip galvanized steel grating, I-type bar steel grating offers lighter weight and better economy without significantly reducing load capacity.

20191014215106623.jpg

Once material and surface treatment are decided, we recommend writing zinc coating thickness and appearance requirements into the technical agreement.

Installation of Welded Steel Grating

To ensure firm, flat installation and easy later maintenance, site construction should follow these requirements:

      Welding or installation clips can be used. Welding offers permanent fixing without loosening; the specific position is on the first flat bar at each corner of the grating, with fillet welds no less than 20mm long and no less than 3mm high. Installation clips do not damage the hot-dip galvanized layer and allow easy removal; each panel needs at least 4 sets, and the number increases with panel length. The safest method is to skip the lower clip and weld the screw heads directly to the beam, ensuring the grating will not slide off the beam due to clip loosening.

After installation, check each panel's fixing points and flatness; put into use only after confirming no warping or looseness.

Welded Steel Grating Examples

  • Hot-dip galvanized steel grating welded from flat bars 65mm-200mm wide and 5mm-20mm thick is the heavy-duty type, suitable for large freight yards, ports, coal mines, roads and bridges, and able to carry heavy trucks.
  • Welded steel grating with 40mm bearing bar pitch is the most economical and lightest hot-dip galvanized type; under small spans it is the ideal choice.
  • Welded steel grating with 60mm bearing bar pitch and 50mm cross bars suits the mining industry, solving the problem of mineral spillage on the panel surface, and is often specified for mining processing plants.
  • Welded steel grating with 30mm bearing bar pitch is the most widely used type in industry; among common hot-dip galvanized steel grating series it offers the strongest resistance to surface impact.
  • Welded steel grating with I-type flat bars, welded from I-shaped flat bars, features light weight and high load capacity; suitable for various places, especially walkways and viewing platforms.

Selection Points of Welded Steel Grating

Confirm each item in the order below during selection to avoid most later rework. Record the conclusion of each step and submit it with your inquiry:

  • Step 1 · Define Span and Support Conditions: First measure the clear span between support beams, then confirm the support surface width is sufficient; these two items determine the usable series range.
  • Step 2 · Verify Service Load: Check separately for pedestrian, maintenance or vehicular traffic; maintenance and vehicular use differ greatly in bearing bar requirements.
  • Step 3 · Determine Material and Surface Treatment: Ordinary carbon steel works for dry indoor environments; hot-dip galvanizing is recommended for outdoor or humid environments; chemical and coastal environments need separate confirmation.
  • Step 4 · Confirm Shape and Fixing Method: Including whether cutouts, corner notches and banding are needed, and whether to use welded fixing or special clips.

Once the above conditions are confirmed, proceed to Instant Quote PageEstimate quantities by dimensions, or send the condition list to customer service for model recommendations from our technicians.

Working Conditions Comparison of Welded Steel Grating

The same specifications last very differently in different environments. The table below gives recommended practices by common service environment for your selection reference:

Operating EnvironmentRecommended PracticesNote:
Indoor Dry EnvironmentsMade of standard carbon steel with surface treatment as requiredFocus on span and load; environmental impact is minimal
Outdoor and Open-Air EnvironmentsHot-dip galvanized surface treatment recommendedCheck zinc coating integrity and re-zinc cut edges
Humid or Water Treatment EnvironmentsUse a higher corrosion protection grade with matching fastenersRegularly inspect fixing points and surface corrosion
Vehicle Traffic AreasCheck load class against vehicle typesNote that bearing bars must run parallel to traffic direction
Pedestrian and Maintenance WalkwaysChoose standard series, balancing walking comfortFocus on surface flatness and end banding
High-Temperature or Large Temperature-Difference EnvironmentsSelect material and connection method by temperatureWatch for loosening caused by thermal expansion and contraction

Custom Fabrication & Quotation

Welded steel grating supports customization to drawings: overall dimensions, flat bar sizes and pitch, banding forms, openings and corner cuts can all be machined to site conditions; for shaped pieces and bulk orders, a layout drawing can be confirmed before production. To estimate quantities, on theInstant Quote PageTry a size-based estimate; for model recommendations, browse ProductsCompare with similar specifications, then confirm with our service team.

FAQ

Which surface treatment should I choose?

Hot-dip galvanizing is recommended for outdoor or humid environments; for dry indoor environments, untreated or painted is fine; coastal, chemical and other strongly corrosive environments need thicker zinc coatings or stainless steel, depending on the expected service life.

How is the price of welded steel grating calculated?

Usually calculated as the theoretical weight for the model times the material unit price, plus hot-dip galvanizing or other surface treatment costs, and fluctuating with steel and zinc prices. You canInstant Quote PageEnter specifications and dimensions for a quick estimate.

Can it be custom-made to site dimensions?

Yes. Bearing bar specs, pitch, panel dimensions and banding forms can all be custom-made to drawings; cutouts, corner notches and shaped cutting are also supported. For bulk orders, a layout drawing can be confirmed before production.

The above are the common parameters and application scenarios of welded steel grating. Models differ greatly with span and load; it is recommended toInstant Quote PageEnter actual dimensions for an estimate, or contact customer service to confirm the final selection.

Related News