Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation

Although on-site steel grating openings can best adapt to various equipment facilities of steel structure platforms, this treatment method has many shortcomings. First, the cut section of the truncated bearing flat bars is exposed, which has certain safety hazards. Second, on-site openings cut the bearing flat bars, so the load cannot be transferred and dispersed, resulting in obvious load concentration at the openings and greatly reduced mechanical performance. G255/30/100 low-carbon steel material, the meaning of the specification model indicates flat...

'Platform steel grating' is a steel grating product that has been widely used in recent years. This steel grating is the most widely used in various industrial fields, has the strongest resistance to surface impact, and especially steel gratings with a cross bar pitch of 50mm have strong resistance to lateral impact."Platform steel grating materials: 1. Both flat bars and cross bars are made of Q235 of GB/T700; other materials can also be used according to user requirements. 2. Flat bars are hot-rolled...

Hot-dip galvanized steel grating, also called hot-dip galvanized grating, is a steel product made of flat bars arranged crosswise with cross bars at certain pitches and welded with square openings in the middle. Hot-dip galvanized steel gratings are mainly used as platform walkways, grating treads, gully grates, trench covers, steel structure platform plates, etc. The cross bars of hot-dip galvanized steel gratings are generally twisted square bars. Hot-dip galvanized steel gratings are generally made of carbon steel with hot-dip galvanized surface...

During steel grating construction, on-site cutting and openings are needed for various reasons, such as pipeline openings in the construction of power plant boiler steel gratings. Generally, openings larger than 200mm on the platform are processed and manufactured at the factory, and openings smaller than 200mm are cut on site according to specific conditions during installation. To ensure that the steel grating does not reduce its load capacity and corrosion resistance after on-site cutting and openings, and that the steel grating is beautiful and tidy after installation, the technical quality of steel grating pipeline openings...
