Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
Stainless steel grating is used in specific environments, but how to distinguish good from bad stainless steel grating? Here are several methods: (1) Identification by color. We can use the pickling method:

Steel grating is a rainwater inlet grate material gradually popularized in municipal facilities. Due to the high strength and easy processing of steel, products with corresponding loads can be produced according to the requirements of different roads, while maximizing the flow section. After hot-dip galvanizing, the appearance and long-term use requirements can also be guaranteed. After up to twenty years of trial use, steel grating rainwater inlet gratings have basically not been damaged and needed replacement...

Before installation, please read the drawings and packing list carefully, then unpack according to the drawings and packing list. Steel gratings are installed as flat steel structure components, and after installation they cannot move laterally or leave the support frame. There are two main installation methods: welding and special installation clips. If the steel grating does not need to be disassembled and moved after installation, it is recommended to use welding to fix the steel grating. Flat bar inserted grating is an extension product of press-locked steel grating, inserting small-sized flat bars into...

The external quality of galvanized steel grating has defects such as uneven color, white exposure, impurities, bubbles (surface, middle, bottom), delamination, thickness deviation, insufficient curing, resin-rich layer, cracking (caused by curing, resin-rich, demolding), ejector pin defects, warping and repair defects, so a strict quality inspection standard system and specifications must be established. A prominent problem in China's FRP grating industry is that too much attention is paid to the quality of samples while ignoring products...

The material of steel grating can be flat bars 20-70mm wide and 2-10mm thick and twisted square bars (cross bars) 6-8mm made by drawing and twisting. The flat bars are placed vertically and parallel, and the twisted square bars are placed vertically flat on the top of the flat bars. A pressure resistance welding machine equipped with a high-power welding transformer and high pressure firmly press-welds the two together. The flat bars mainly bear the load, and the twisted square bars mainly fix the flat bars and prevent slipping. The products mainly implement the standards of the People's Republic of China...
