
Sun-shade steel grating is made of carbon flat bars, stainless steel, brass or aluminum plates by slotting (punching), interlocking, welding and finishing. Press-locked steel grating inherits the high strength, corrosion resistance and maintenance-free features of ordinary grating, with uniform, precise composition, light and elegant structure. It is widely used for trench covers, steel stair treads and pool covers.

Many buyers quote by dimensions alone, but the same dimensions correspond to different models under different loads and environments. This page lists the key conditions affecting model selection and how to confirm each, helping clarify technical requirements at the quotation stage.
Items to confirm when selecting sun-shade steel grating
This page does not list a fixed specification table, as such products are usually custom-fabricated to site conditions. We recommend confirming each item in the table above before inquiry: once mismatched with actual site conditions, refabrication is often required later.ProductsCommon specifications are organized by series for reference.
| Items to Confirm | What Needs to Be Clarified | Common Practices |
|---|---|---|
| Span and Support | Clear span between support beams and support surface width | Determine by field-measured dimensions |
| Service Load | Pedestrian, maintenance access or vehicle traffic | Verify by actual traffic type |
| Material Requirements | Carbon steel or stainless steel, grade requirements | Determine by corrosion grade of service environment |
| Surface Treatment | Hot-dip galvanized, painted, or untreated | Hot-dip galvanizing recommended for outdoor and humid environments |
| Dimensions | Panel length and width, whether openings or notches are needed | Custom fabrication per layout drawing |
| Acceptance Requirements | Acceptance Criteria for Flatness, Tolerances and Appearance | Recommended to specify in the technical agreement |
Press-locked steel grating can be divided into four types
For easy reference, sun-shade steel grating is listed below by common classification, with each type's suitability:
| Type | Features and Uses |
|---|---|
| Ordinary type | Bearing bars are slotted, and cross bars are press-locked into shape. Note: the maximum processing height of ordinary grating is 100mm; grating length is usually less than 2000mm. |
| Integral type | Bearing bars and cross bars have the same height, slotted to half the bearing bar depth. Note: grating height is not more than 100mm; length is usually less than 2000mm. |
| Sun-shade type | Bearing bars have 30 or 45 degree slots, and cross bars are slotted and press-locked into shape. Note: gratings of other pitches and specifications can be made as needed, using ordinary carbon steel, stainless steel, aluminum, etc.; grating height is less than 100mm. |
| Heavy-duty grating | High bearing bars and cross bars bite into each other and are pressed into shape under 1200 tons of pressure. Note: suitable for high-span, heavy-load applications. |
Press-locked steel grating features firm weld points, uniform spacing, flat mesh, attractive design, practicality, light weight, high strength, corrosion resistance and maintenance-free service. It is widely used in civil and commercial buildings, theaters, subways, light rail and other municipal projects, for suspended ceilings, indoor and outdoor decoration, platform walkways, ventilation windows (shafts), signboards and various covers. With firm weld points, uniform spacing, flat mesh and attractive design, it is both a practical product and a work of art. Press-locked steel grating is widely used for ceilings or interior decoration in factory halls, theaters and shopping malls, and also for platform walkways.
Determine the category first and then the specific model; this saves detours and makes comparison with other materials easier.
Key selection points for sun-shade steel grating
Confirm each item in the order below during selection to avoid most later rework. Record the conclusion of each step and submit it with your inquiry:
- Step 1 · Define Span and Support Conditions: First measure the clear span between support beams, then confirm the support surface width is sufficient; these two items determine the usable series range.
- Step 2 · Verify Service Load: Check separately for pedestrian, maintenance or vehicular traffic; maintenance and vehicular use differ greatly in bearing bar requirements.
- Step 3 · Determine Material and Surface Treatment: Ordinary carbon steel works for dry indoor environments; hot-dip galvanizing is recommended for outdoor or humid environments; chemical and coastal environments need separate confirmation.
- Step 4 · Confirm Shape and Fixing Method: Including whether cutouts, corner notches and banding are needed, and whether to use welded fixing or special clips.
Once the above conditions are confirmed, proceed to Instant Quote PageEstimate quantities by dimensions, or send the condition list to customer service for model recommendations from our technicians.
Typical application scenarios of sun-shade steel grating
Judging from completed projects, sun-shade steel grating is mainly used in the following places; similar conditions can refer directly:
- Industrial Platforms & Maintenance Walkways: equipment platforms and inspection passages in power plants, chemical plants and steel-structure workshops;
- Municipal & Landscape: road drainage trench covers, rainwater grates, tree grates, park boardwalks;
- Transportation & Ports: wharf trestles, multi-story parking garage lanes, railway bridge walkways;
- Environmental & Water Treatment: walkways in wastewater treatment plants, tank platforms, screening machine platforms;
- Others: elevated tower platforms, stair treads, fences and railings, etc.
If your working conditions fall outside the above range, you can provide site photos and dimensions, and our technicians will help assess them.
Key Conditions to Confirm During Selection
Selecting sun-shade steel grating is not complicated; the key is clarifying the service conditions first. The elements to confirm are listed below:
- First clarify the span and support beam spacing to determine the required series;
- Then check load requirements by usage type (pedestrian, maintenance, vehicular);
- Finally, determine the surface treatment by service environment (dry indoor, outdoor, coastal, chemical).
Placing the order after confirming these items effectively avoids specification mismatch and on-site rework.
Sun-shade steel grating working-condition comparison
The same specifications last very differently in different environments. The table below gives recommended practices by common service environment for your selection reference:
| Operating Environment | Recommended Practices | Note: |
|---|---|---|
| Indoor Dry Environments | Made of standard carbon steel with surface treatment as required | Focus on span and load; environmental impact is minimal |
| Outdoor and Open-Air Environments | Hot-dip galvanized surface treatment recommended | Check zinc coating integrity and re-zinc cut edges |
| Humid or Water Treatment Environments | Use a higher corrosion protection grade with matching fasteners | Regularly inspect fixing points and surface corrosion |
| Pedestrian and Maintenance Walkways | Choose standard series, balancing walking comfort | Focus on surface flatness and end banding |
| High-Temperature or Large Temperature-Difference Environments | Select material and connection method by temperature | Watch for loosening caused by thermal expansion and contraction |
| Temporary or Short-Term Use | Can be configured with the light-duty series | For short schedules, prioritize easy disassembly and turnover |
Custom Fabrication & Quotation
Common specifications are usually in stock; lead times for shaped parts and bulk orders are determined by specification and production scheduling. For projects needing site measurement and layout design, provide photos and dimensions and we will assist with drawings to reduce on-site cutting. For practices on similar projects, seeProject Cases, for model comparison see Products.
FAQ
How is the price of sun-shade steel grating calculated?
Usually calculated as the theoretical weight for the model times the material unit price, plus hot-dip galvanizing or other surface treatment costs, and fluctuating with steel and zinc prices. You canInstant Quote PageEnter specifications and dimensions for a quick estimate.
What are the common specifications of sun-shade steel grating?
Common specifications are determined by combinations of bearing bar width and thickness, bearing bar pitch, and cross bar pitch; different combinations correspond to different load capacities and theoretical weights. Our Products section lists common models by series; you can also send span and load requirements to customer service for sizing help.
Can it be custom-made to site dimensions?
Yes. Bearing bar specs, pitch, panel dimensions and banding forms can all be custom-made to drawings; cutouts, corner notches and shaped cutting are also supported. For bulk orders, a layout drawing can be confirmed before production.
Once the specifications and surface treatment of sun-shade steel grating are determined, a quotation can be provided. For custom fabrication or load calculation, you canInstant Quote PageSubmit dimensions, or contact us directly for technical support.






