Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
Finished steel grating from our factory in Anping County, Hebei Province is generally packed with steel straps; the following points should be noted when strapping: 1. Number, arrange and group the galvanized steel grating products according to the position of each panel on the drawing, as specified in the order contract or order drawing.

1. Clause 7.2 of the Steel Grating Standard YB/T4004--1998 specifies the method for calculating grating area. 1.1 Where no drawing is provided and the grating is fabricated to the user's specified dimensions, the area is the sum of the quantity of delivered grating panels multiplied by width and by length, including openings and cut-outs.

There are two types of compressed steel grating: full-insert and half-insert. Press-locked steel grating is manufactured from plain carbon flat bars, stainless steel, brass plate or aluminium plate of set dimensions through slotting, interlocking, welding and finishing. Full-insert grating is made by slotting grating of the same specification and pressing them together; it is light, high-strength, corrosion-resistant, maintenance-free and attractive. Press-locked steel grating is widely used in civil and commercial buildings, theatres, subways and urban rail...

I. Terms and definitions for stair treads 1 Fixed steel inclined ladder: a tread steel ladder permanently installed on a building or equipment, inclined at 30°~75° to the horizontal. 2 Stile (rail)

Steel grating (steel grid plate) 1. Generally made of carbon steel, with surfaces mostly hot-dip galvanized or cold galvanized; galvanizing prevents oxidation and improves corrosion protection. Stainless steel versions are also available. 2. Steel grating offers ventilation, daylighting, heat dissipation, slip resistance and explosion resistance. Its surface can be serrated (serrated steel grating) for better slip resistance, and the bearing bars may be I-section or flat type.
