This article introduces steel grating in the order of the impact of COVID-19 on China's economy, basic concepts, and specifications. Each section gives practical criteria wherever possible; if you only need a quick answer, start with the key points at the beginning of each section. The same approach applies to hot-dip galvanized steel grating.
Specifications of the Impact of COVID-19 on China's Economy
Main specification comparison is as follows:

After the outbreak of COVID-19, the Chinese government quickly took a series of strong measures to halt the spread of the epidemic, and related research has continued to advance with some progress made. However, the epidemic is still at a high-incidence stage, and a fully accurate assessment of its impact on China's economy remains difficult. The government's continued containment measures help bring the outbreak under control as soon as possible and prevent further damage. Optimistically, with strong containment measures, the impact may be concentrated mainly in the first quarter and gradually ease thereafter. Our subsequent macroeconomic analysis is based on this assumption and will be adjusted as needed according to the actual severity and duration of the epidemic.
The above are common specifications; actual ordered dimensions and tolerance requirements shall be confirmed against the layout drawing.
Bigger is not always better. Steel grating selection should be as economical as possible while meeting load requirements; over-thickening increases self-weight and cost and complicates installation. The product page offers a fuller comparison for galvanized grating; refer to it before deciding.
Common Models and Sizes of the Impact of COVID-19 on China's Economy
Main specification comparison is as follows:
Currently, steel grating enterprises and related industries - flat bar mills, galvanizing plants, logistics companies - have partially resumed production.
The COVID-19 outbreak has hit service sectors such as transport, accommodation and catering, and tourism first and foremost, becoming the biggest drag on economic growth. Delayed return to work and migrant workers postponing their return to cities will also markedly slow growth in the secondary sector. However, once the epidemic eases, a range of growth-stabilizing measures may be stepped up in the face of downward economic pressure, and the release of previously accumulated productive capacity could help the secondary sector rebound. The peak production season for the primary sector has not yet arrived, and the epidemic remains under control in rural areas, so the impact on the primary sector is likely to be relatively small.
The above are common specifications; actual ordered dimensions and tolerance requirements shall be confirmed against the layout drawing.
What is most easily overlooked in spec tables are tolerances and end treatment. Steel grating usually has machining allowance in the length direction; if embedded installation is used on site, edge closing and corner notch requirements must be stated in advance. Galvanized grating is handled similarly in these details; we recommend marking them clearly on the drawings as well.
Further notes: How to combine hot-dip galvanized steel grating and galvanized grating in use
In engineering, galvanized grating is often used together with the components mentioned in this article. The two differ in load carrying and installation practices; when combining them, pay special attention to the connection of support conditions and fixing methods, as junction treatment is often where problems arise. For unified drawings, submit dimensions of both types and our technicians will process them under the same layout logic.
- For all product specifications and theoretical weights by series, visit Steel Grating Product Center
- To estimate cost by size and quantity, use Instant Quote PageSubmit Requirements
- To see how similar projects were executed, refer to Project Cases field applications
FAQ
What information is needed for custom sizes?
Usually you need to provide the panel dimensions (length x width), bearing bar specs and direction, center-to-center pitch of bearing bars and cross bars, surface treatment, and special requirements such as cutouts, corner notches and banding. Site photos or sketches are even better.
How to choose between hot-dip galvanizing and cold galvanizing?
The two anti-corrosion mechanisms differ: hot-dip galvanizing immerses steel in molten zinc to form a metallurgically bonded coating, thick and long-lasting, suitable for outdoor and humid environments; cold galvanizing is electrochemical deposition with a thinner, more uniform appearance, suitable for dry indoor environments or applications requiring high dimensional precision.
Where can I find specific specifications?
our websiteProductsCommon specifications and theoretical weights are organized by series, also available in Instant Quote PageEstimate by size, or contact us directly for sizing advice.
The above is for sizing and construction reference. To verify specific parameters or request a quotation, please visitInstant Quote Page, or contact our technical staff.
If you already have drawings or site dimensions, submit them directly and we will help verify specifications and layout, avoiding on-site cutting and rework caused by mismatched models. Without drawings, site photos and approximate dimensions are enough for an estimate.






