Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
Steel grating is a steel product made of flat bars and cross bars (twisted square bars, square bars, round bars, flat bars, etc.) arranged crosswise at certain pitches and spot-welded with square openings in the middle. Cross bars are generally twisted square bars. Steel grating platforms are generally made of carbon steel with hot-dip galvanized surface to prevent oxidation. They can also be made of stainless steel. Marking methods of hot-dip galvanized steel grating: 1. Flat bar width 65mm-200mm, thickness 5...

Stainless steel gratings can also rust under certain conditions. Stainless steel gratings have the ability to resist atmospheric oxidation - i.e., rust resistance - and also the ability to resist corrosion in media containing acid, alkali and salt - i.e., corrosion resistance. However, the corrosion resistance of stainless steel gratings varies with the chemical composition of the steel itself, processing conditions, service conditions and the type of environmental media. Ordinary stainless steel usually contains no less than 12% chromium, and high...

In the daily use of galvanized steel grating products, what people value is the anti-corrosion performance of the grating itself. Some manufacturers' steel gratings, due to insufficient attention to anti-corrosion, fail to adapt well to the actual environment in use, which also affects the service life of steel gratings. Although users have various requirements for the use of steel gratings, the requirement worth attention is still the anti-corrosion performance of the product itself. Steel grating pro...

Steel grating fixing methods: welding and installation clips can be used. The advantage of welding is permanent fixing without loosening; the advantage of installation clips is that they do not damage the hot-dip galvanized layer and are easy to disassemble. A safe method is to dispense with the lower clip and directly reverse-weld the screw heads onto the beam, ensuring that the steel grating will not slide off the beam due to loose installation clips. The anti-slip layer of steel grating is adhered to the surface of the steel grating metal plate through a primer layer, and the anti-slip layer is a sand layer. The sand is...

What are the technical requirements of the petrochemical industry for galvanized steel grating? Material requirements: bearing flat bars, cross bars and edge binding plates are generally made of carbon structural steel or stainless steel. The mechanical properties and chemical composition of carbon structural steel should comply with the relevant rules and requirements for Q-A in GB/T700-88; the mechanical properties and chemical composition of stainless steel should meet the materials specified in GB... Layout requirements: manufacturers should carry out the layout design of steel gratings according to the component and opening layout drawings of the steel structure platform...
