Anping, Hebei · China's Wire Mesh Capital | APG Steel Grating — Direct Manufacturer of Hot-Dip Galvanized Steel Grating Instant QuoteSitemap

Steel Grating · Stair Treads · Covers

  • 20-Year Manufacturer
Products · 8 Major Series

Full Range of Hot-Dip Galvanized Steel Grating in Stock

Steel Grating / Stair Treads / Trench Covers / Compound Grating - One-Stop Purchase

Full range of steel grating covering welded, press-locked, compound, serrated, I-type and more, with custom shaped fabrication and hot-dip galvanizing. In stock and ready to dispatch, with free sizing & quotation.

WhatsApp & E-mail support | Free sizing & quotation

  • Serrated hot-dip galvanized steel grating panel close-up
  • Plain hot-dip galvanized steel grating panel
  • Galvanized steel grating stair tread with checker plate nosing

Semi Press-Locked Steel Grating

Published: 2020-04-24Popularity: 509

Semi-press-locked steel grating is a steel grating product widely used in industrial and municipal engineering, and press-locked steel grating is a common term for the matching or same series. This page explains them one by one, from reading specifications, materials and surface treatment, applicable working conditions, installation and fixing, to customization and quotation. If you already have drawings or site dimensions, you can check against the items in this article, or visit theInstant Quote Page to estimate quantities.

Items to confirm when selecting semi-press-locked steel grating

This page does not list a fixed specification table, as such products are usually custom-fabricated to site conditions. We recommend confirming each item in the table above before inquiry: once mismatched with actual site conditions, refabrication is often required later.ProductsCommon specifications are organized by series for reference.

Items to ConfirmWhat Needs to Be ClarifiedCommon Practices
Span and SupportClear span between support beams and support surface widthDetermine by field-measured dimensions
Service LoadPedestrian, maintenance access or vehicle trafficVerify by actual traffic type
Material RequirementsCarbon steel or stainless steel, grade requirementsDetermine by corrosion grade of service environment
DimensionsPanel length and width, whether openings or notches are neededCustom fabrication per layout drawing
End TreatmentWhether banding or end plates are neededBanding recommended for open edges
Packaging & ShippingWhether packing and moisture protection are neededPacking and cushioning recommended for long-distance shipping

Specification parameters of semi-press-locked steel grating

Different specifications correspond to different load capacities and theoretical weights. The common specification parameters of semi-press-locked steel grating are shown in the table below; actual order dimensions and tolerance requirements are subject to confirmation on the layout drawing:

20190606183315_0.jpg

Semi-press-locked steel grating is made by welding large-section flat bars and small-section flat bars together. It is best if the flat bars have the same thickness, making the finished product attractive and material-saving, which is economical.

The above are common specifications; actual ordered dimensions and tolerance requirements shall be confirmed against the layout drawing.

Basic concepts of semi-press-locked steel grating

To judge whether semi-press-locked steel grating suits your project, first understand what it is and how it is made. This section provides basic explanations from the perspectives of basic concepts, structural features, and common processing methods, laying the groundwork for the parameter comparison and selection judgment that follow.

1. Press-locked steel grating, also known as insert-locked or pressure-locked steel grating, is made from ordinary carbon flat bars, stainless steel, brass plates, or aluminum plates of certain dimensions through slotting (hole punching), insertion, welding, finishing, and other processes. Press-locked steel grating covers the high strength, corrosion protection, and maintenance-free  features of ordinary steel gratings, and is uniquely characterized by uniform and fine combination, simple and exquisite structure, natural harmony, and elegant style. This product can be widely used for trench covers, stair treads, and tank covers.

Once you grasp these basic concepts, the specifications and sizing recommendations that follow will be much easier to understand.

2. Features of steel gratings

The main performance features of semi-press-locked steel grating can be summarized as follows, for item-by-item checking during scheme comparison and technical disclosure:

  • Hot-dip galvanized (30mm flat bar pitch): hot-dip galvanized steel gratings with a 30mm flat bar pitch are the most widely used type in industry. Among the common hot-dip galvanized steel grating series, they have the strongest resistance to surface impact. Hot-dip galvanized steel gratings welded from flat bars 65mm-200mm wide and 5mm-20mm thick are suitable for large freight yards, docks, coal mines, roads, bridges, etc., and can bear the passage of large trucks.
  • Hot-dip galvanized (40mm flat bar pitch): hot-dip galvanized steel gratings with a 40mm flat bar pitch are the most economical and lightest type. In occasions with small spans, it is the ideal choice. Suitable for various occasions, especially walkways and viewing platforms.
  • Hot-dip galvanized (60mm flat bar pitch): hot-dip galvanized steel gratings with a 60mm flat bar pitch and 50mm cross bar pitch are suitable for mining, solving the problem of mineral spillage on the panel surface, and are often designated for mining processing plants.

3. Galvanized steel gratings are attractive in appearance and durable: hot-dip galvanized surface treatment gives them considerable corrosion resistance and glossy attractive surfaces; good ventilation, lighting, heat dissipation, anti-slip performance, and no dirt accumulation.

20190405093358792_661.jpg

Features of press-locked steel grating

    Press-locked steel grating features firm welded points, uniform hole pitch, flat mesh surface, attractive design, practicality and simplicity, high strength, corrosion protection, maintenance-free, and many other features.

4. Applications of press-locked steel grating:

    Now widely used in civil and commercial buildings, theaters, subways, urban rail, and other municipal engineering fields; suitable for ceilings, indoor and outdoor decoration, platform walkways, ventilation windows (wells), advertising signs, various covers, etc. Press-locked steel gratings have firm welded points, uniform hole pitch, and flat mesh surfaces, with attractive, practical design; they are both a practical product and a work of art. Over the years, more than a hundred varieties have been developed, and exported products to sixteen countries are deeply favored by customers. Press-locked steel gratings are widely used in factory halls, theaters, shopping mall ceilings or indoor decoration, and also for platform walkways.

   Widely used in petrochemical plants, power plants, waterworks, sewage treatment plants, municipal engineering, environmental sanitation engineering, and other fields, as platforms, walkways, trestles, trench covers, manhole covers, ladders, fences, handrails, etc.

Overall, selection should weigh span, load and service environment together.

Selection key points for semi-press-locked steel grating

Confirm each item in the order below during selection to avoid most later rework. Record the conclusion of each step and submit it with your inquiry:

  • Step 1 · Balance Appearance vs. Load Capacity: Press-locked panels have a neat appearance and uniform hole spacing, suitable for appearance-critical platforms; load capacity must be checked by series.
  • Step 2 · Confirm Bearing Bar Specs and Pitch: Determined by span and load; the smaller the pitch, the denser the surface, with correspondingly higher self-weight and price.
  • Step 3 · Confirm Whether Banding Is Needed: Open edges should be banded, both to protect the panel and to prevent edges lifting and injuring people.
  • Step 4 · Confirm Installation and Maintenance Convenience: For areas needing frequent opening for maintenance, removable fixings rather than welding are recommended.

Once the above conditions are confirmed, proceed to Instant Quote PageEstimate quantities by dimensions, or send the condition list to customer service for model recommendations from our technicians.

Working condition comparison for semi-press-locked steel grating

The same specifications last very differently in different environments. The table below gives recommended practices by common service environment for your selection reference:

Operating EnvironmentRecommended PracticesNote:
Indoor Dry EnvironmentsMade of standard carbon steel with surface treatment as requiredFocus on span and load; environmental impact is minimal
Outdoor and Open-Air EnvironmentsHot-dip galvanized surface treatment recommendedCheck zinc coating integrity and re-zinc cut edges
Chemical or Coastal EnvironmentsConfirm material and anti-corrosion scheme per mediumAvoid galvanic corrosion from direct contact between different metals
Vehicle Traffic AreasCheck load class against vehicle typesNote that bearing bars must run parallel to traffic direction
High-Temperature or Large Temperature-Difference EnvironmentsSelect material and connection method by temperatureWatch for loosening caused by thermal expansion and contraction
Clean Rooms and Food & PharmaceuticalPrioritize surface treatment and cleaning convenienceAvoid dust-collecting structures and cleaning dead corners

Custom Fabrication & Quotation

Semi-press-locked steel grating supports custom fabrication from drawings: overall dimensions, flat bar specifications and pitch, edge banding form, openings and corner cuts can all be machined according to site conditions; for irregular parts and bulk orders, a layout drawing can be produced for confirmation before production. To estimate quantities, you can use theInstant Quote PageTry a size-based estimate; for model recommendations, browse ProductsCompare with similar specifications, then confirm with our service team.

FAQ

What mistakes are easy to make during installation?

Three main points: first, bearing bars installed in the wrong direction so loads are carried by cross bars; second, insufficient or missing fixing points; third, welding slag not removed and zinc-rich paint not reapplied after welding. These three cause the most on-site problems.

Which surface treatment should I choose?

Hot-dip galvanizing is recommended for outdoor or humid environments; for dry indoor environments, untreated or painted is fine; coastal, chemical and other strongly corrosive environments need thicker zinc coatings or stainless steel, depending on the expected service life.

How is the price of semi-press-locked steel grating calculated?

Usually calculated as the theoretical weight for the model times the material unit price, plus hot-dip galvanizing or other surface treatment costs, and fluctuating with steel and zinc prices. You canInstant Quote PageEnter specifications and dimensions for a quick estimate.

The above are the common parameters and application scenarios of semi-press-locked steel grating. Models vary greatly with different spans and loads; it is recommended to use theInstant Quote PageEnter actual dimensions for an estimate, or contact customer service to confirm the final selection.

Related News