Anping, Hebei · China's Wire Mesh Capital | APG Steel Grating — Direct Manufacturer of Hot-Dip Galvanized Steel Grating Instant QuoteSitemap

Steel Grating · Stair Treads · Covers

  • 20-Year Manufacturer
Products · 8 Major Series

Full Range of Hot-Dip Galvanized Steel Grating in Stock

Steel Grating / Stair Treads / Trench Covers / Compound Grating - One-Stop Purchase

Full range of steel grating covering welded, press-locked, compound, serrated, I-type and more, with custom shaped fabrication and hot-dip galvanizing. In stock and ready to dispatch, with free sizing & quotation.

WhatsApp & E-mail support | Free sizing & quotation

  • Serrated hot-dip galvanized steel grating panel close-up
  • Plain hot-dip galvanized steel grating panel
  • Galvanized steel grating stair tread with checker plate nosing
You are here: Home > Products

Press-Locked Steel Grating

Published: 2018-10-23Popularity: 126

  13323188871.jpg

Press-locked steel grating, also called interlocked steel grating, is made from ordinary low-carbon flat bars, stainless steel, brass plates or aluminum plates of specified sizes through slotting (punching), interlocking, welding and finishing. The product has firm weld points, uniform hole spacing and an elegant, practical design. Press-locked steel grating has all the features of ordinary steel grating - high strength, corrosion resistance, maintenance-free - plus unique characteristics of uniform and precise combination, light and refined structure, natural harmony and elegant style. It is both a functional product and a work of art, and has been widely applied.  

Many projects habitually quote only dimensions when purchasing press-locked steel grating, but the same dimensions correspond to different models under different loads and environments. This page lists the key conditions that affect the model separately and explains how to confirm each one, helping to clarify the technical conditions at the quotation stage.

Items to Confirm When Selecting Press-Locked Steel Grating

This page does not list a fixed specification table, as such products are usually custom-fabricated to site conditions. We recommend confirming each item in the table above before inquiry: once mismatched with actual site conditions, refabrication is often required later.ProductsCommon specifications are organized by series for reference.

Items to ConfirmWhat Needs to Be ClarifiedCommon Practices
Span and SupportClear span between support beams and support surface widthDetermine by field-measured dimensions
Material RequirementsCarbon steel or stainless steel, grade requirementsDetermine by corrosion grade of service environment
Surface TreatmentHot-dip galvanized, painted, or untreatedHot-dip galvanizing recommended for outdoor and humid environments
DimensionsPanel length and width, whether openings or notches are neededCustom fabrication per layout drawing
Fixing MethodWelded fixing or special clipsRemovable covers recommended for positions requiring maintenance
Packaging & ShippingWhether packing and moisture protection are neededPacking and cushioning recommended for long-distance shipping

Press-Locked Steel Grating Types

For easy comparison, press-locked steel grating is listed below by common classification methods, with the applicable situation of each:

   By different insertion methods and insertion angles, it can be divided into press-locked steel grating, heavy-duty steel grating, integral steel grating, sunshade steel grating, etc.

  u Press-locked type press-locked steel grating: after the bearing flat bars are slotted, the cross flat bars are press-locked into shape. Generally, the maximum fabrication height for ordinary type steel grating is 100mm; the grating length is usually under 2000mm.

  u Heavy-duty press-locked steel grating is a product where tall bearing bars and cross flat bars interlock and are pressed tight under 1200 tons of pressure. It is suitable for high-load, long-span applications.

  u Integral type press-locked steel grating: the bearing bars and cross flat bars have the same height, with slot depth equal to 1/2 of the bearing bar. Grating height does not exceed 100mm; length is usually under 2000mm.

  u Sunshade type press-locked steel grating: the bearing bars have 30° or 45° angled slots, and the cross bar flat bars are slotted and press-locked into shape. We can fabricate gratings with other pitches and specifications as needed, using ordinary carbon steel, stainless steel, aluminum and other materials. Grating height is under 100mm.

Determine the category first and then the specific model; this saves detours and makes comparison with other materials easier.

Press-Locked Steel Grating Selection Key Points

Confirm each item in the order below during selection to avoid most later rework. Record the conclusion of each step and submit it with your inquiry:

  • Step 1 · Balance Appearance vs. Load Capacity: Press-locked panels have a neat appearance and uniform hole spacing, suitable for appearance-critical platforms; load capacity must be checked by series.
  • Step 2 · Confirm Bearing Bar Specs and Pitch: Determined by span and load; the smaller the pitch, the denser the surface, with correspondingly higher self-weight and price.
  • Step 3 · Confirm Whether Banding Is Needed: Open edges should be banded, both to protect the panel and to prevent edges lifting and injuring people.
  • Step 4 · Confirm Installation and Maintenance Convenience: For areas needing frequent opening for maintenance, removable fixings rather than welding are recommended.

Once the above conditions are confirmed, proceed to Instant Quote PageEstimate quantities by dimensions, or send the condition list to customer service for model recommendations from our technicians.

Typical Application Scenarios of Press-Locked Steel Grating

Press-locked steel grating suits a variety of working conditions, with typical application scenarios mainly including:

  • Industrial Platforms & Maintenance Walkways: equipment platforms and inspection passages in power plants, chemical plants and steel-structure workshops;
  • Municipal & Landscape: road drainage trench covers, rainwater grates, tree grates, park boardwalks;
  • Transportation & Ports: wharf trestles, multi-story parking garage lanes, railway bridge walkways;
  • Environmental & Water Treatment: walkways in wastewater treatment plants, tank platforms, screening machine platforms;
  • Others: elevated tower platforms, stair treads, fences and railings, etc.

If your working conditions fall outside the above range, you can provide site photos and dimensions, and our technicians will help assess them.

Key Conditions to Confirm During Selection

To avoid selection errors and later rework, confirm the following items before purchasing press-locked steel grating:

  • First clarify the span and support beam spacing to determine the required series;
  • Then check load requirements by usage type (pedestrian, maintenance, vehicular);
  • Finally, determine the surface treatment by service environment (dry indoor, outdoor, coastal, chemical).

Placing the order after confirming these items effectively avoids specification mismatch and on-site rework.

Press-Locked Steel Grating Service Condition Comparison

The same specifications last very differently in different environments. The table below gives recommended practices by common service environment for your selection reference:

Operating EnvironmentRecommended PracticesNote:
Indoor Dry EnvironmentsMade of standard carbon steel with surface treatment as requiredFocus on span and load; environmental impact is minimal
Humid or Water Treatment EnvironmentsUse a higher corrosion protection grade with matching fastenersRegularly inspect fixing points and surface corrosion
Chemical or Coastal EnvironmentsConfirm material and anti-corrosion scheme per mediumAvoid galvanic corrosion from direct contact between different metals
Pedestrian and Maintenance WalkwaysChoose standard series, balancing walking comfortFocus on surface flatness and end banding
High-Temperature or Large Temperature-Difference EnvironmentsSelect material and connection method by temperatureWatch for loosening caused by thermal expansion and contraction
Temporary or Short-Term UseCan be configured with the light-duty seriesFor short schedules, prioritize easy disassembly and turnover

Custom Fabrication & Quotation

Common specifications are usually in stock; lead times for shaped parts and bulk orders are determined by specification and production scheduling. For projects needing site measurement and layout design, provide photos and dimensions and we will assist with drawings to reduce on-site cutting. For practices on similar projects, seeProject Cases, for model comparison see Products.

FAQ

Which surface treatment should I choose?

Hot-dip galvanizing is recommended for outdoor or humid environments; for dry indoor environments, untreated or painted is fine; coastal, chemical and other strongly corrosive environments need thicker zinc coatings or stainless steel, depending on the expected service life.

What Are the Common Specifications of Press-Locked Steel Grating?

Common specifications are determined by combinations of bearing bar width and thickness, bearing bar pitch, and cross bar pitch; different combinations correspond to different load capacities and theoretical weights. Our Products section lists common models by series; you can also send span and load requirements to customer service for sizing help.

What mistakes are easy to make during installation?

Three main points: first, bearing bars installed in the wrong direction so loads are carried by cross bars; second, insufficient or missing fixing points; third, welding slag not removed and zinc-rich paint not reapplied after welding. These three cause the most on-site problems.

Quotations can be given once the specifications and surface treatment of press-locked steel grating are confirmed. For custom fabrication to drawings or load calculations, you canInstant Quote PageSubmit dimensions, or contact us directly for technical support.

Related News