Industry News · Technical Support · Product Cases
A veteran engineer with 30 years of experience explains the YB/T 4001.1 standard, sizing calculations and installation essentials, helping you purchase scientifically and avoid detours.
WhatsApp & E-mail support | Free sizing & quotation
With steel grating widely used across many sectors in China, the Ministry of Industry and Information Technology issued the latest steel grating industry standard on 2019-08-27 to regulate healthy and orderly development of the industry. The new standard summarises problems the industry has faced in recent years and applications in new fields, and puts more emphasis on unified rules for safe use, design, ordering and settlement, making the industry more standardised...

Steel grating is increasingly used as a material for rainwater inlet gratings in municipal facilities. Thanks to the high strength and easy fabrication of steel, products can be made to the load requirements of different roads while maximising the water flow area, and hot-dip galvanizing also ensures appearance and long-term performance. After up to twenty years of trials, steel grating inlet screens have shown virtually no damage requiring replacement...

Before installation, read the drawings and packing list carefully and unpack accordingly. Steel grating is installed as a flat steel structure component; once installed it must not move laterally or leave its supports. There are two main fixing methods, welding and special installation clips. If the grating will not need to be removed or moved after installation, welding is recommended. Flat bar interlaced grating is an extension of press-locked grating, in which smaller flat bars are inserted...

The external quality of galvanized steel grating can show uneven colour, exposed white spots, impurities, bubbles (surface, middle and bottom), delamination, thickness deviation, insufficient cure, resin-rich layers, cracking (from curing, resin richness or demoulding), ejector pin defects, warping and repair marks, so a strict quality inspection system and standard must be established. A prominent problem in China's FRP grating industry is that sample quality is over-emphasised while production...

Steel grating can be made from flat bars 20-70 mm wide and 2-10 mm thick together with 6-8 mm twisted square bars (cross bars) produced by drawing and twisting. The flat bars stand on edge in parallel, with the twisted square bars laid perpendicular on top, and the two are firmly pressure-welded together using a high-power welding transformer and high-pressure resistance welder. The flat bars carry the load, while the twisted square bars hold them in place and provide anti-slip performance. Products mainly follow Chinese...
