← Anping Steel Grating Factory Official Website ☎ 13323188871

Market Research Report

Drainage Trench Cover (Trench Grate) Product Market Research Report

A systematic overview of mainstream trench cover product lines across three dimensions - material, production process and application environment - covering load classification, price references, industrial clusters and manufacturer distribution, industry trends and selection advice.

Report date: September 2026 Data scope: 2026 public-channel research Categories covered: 8 major material categories Reference standards: GB/T 23858-2009 / EN 124 / EN 1433
Ductile IronResin composite SMC/BMCFRP (Fiberglass Reinforced Plastic) Stainless SteelGalvanized Steel GratingReinforced Concrete Slot linear drainage
Quick access to main site: Products Grating Trench Cover Steel Grating Steel Grating Grating Stair Treads Welded Steel Grating Instant Quote Project Cases Contact Us

Table of Contents

0Research Summary

A quick-read summary of conclusions for procurement decision-makers and product planners, in five sentences.
≈ RMB 20 billion+
Estimated 2025 domestic municipal cover market size (including manhole covers and gully gratings; different sources range from RMB 20 to 45 billion)
8%–10%
Industry CAGR over the past five years, on a steady growth track
6 classes
Load class system A15 to F900 (GB/T 23858-2009), corresponding to test loads from 1.5 t to 90 t
8 major categories
Mainstream materials: ductile iron / gray iron / SMC-BMC resin / FRP / stainless steel / steel grating / concrete / plastics and derivatives

Key Conclusions

  1. The structural substitution of "ordinary cast iron" with "high-performance materials" is the main theme.Gray iron trench covers, prone to rust, brittleness and theft, are being replaced by ductile iron, resin composites and stainless steel; ductile iron dominates heavy-duty municipal applications (D400 and above), while resin composites are rapidly gaining share in light-to-medium load and anti-theft scenarios.
  2. The first yardstick of selection is load class, not price.GB/T 23858-2009 classifies products into six classes - A15 / B125 / C250 / D400 / E600 / F900 - corresponding to green belts, sidewalks, residential areas, urban arterial roads, freight stations and docks, airport runways, etc.; the application environment directly determines the upper limits of material and process choices.
  3. Application environments fall into eight scenario families.Municipal roads, slow traffic and landscape, residential communities and back streets, industry and logistics, airport and port heavy loads, power cable trenches, food and pharmaceutical sanitary, and chemical corrosive environments - each family has a clear primary material solution.
  4. The production method determines the floor of cost and quality.Even among "resin covers", SMC molding, BMC molding and hand lay-up FRP differ greatly in performance; among metal covers, lost-foam cast ductile iron, welded hot-dip galvanized steel grating and stamped stainless steel each have process barriers - low-price no-name products often cut corners here.
  5. Segmentation, finished-product orientation and intelligence are the growth directions.Concealed covers, slot linear drainage channels (prefabricated polymer concrete / stainless steel linear drainage systems), high-opening-ratio covers for Sponge City projects, and smart covers with liquid-level monitoring are the main product upgrade tracks in recent years.
Data note: the market size and price ranges in this report come from public online channels retrieved in September 2026 (vendor publicity, B2B platforms, industry media), with inconsistent statistical scopes (some count only "trench covers", others include manhole covers, gully gratings, rainwater inlets and all other municipal covers). Prices are for cross-comparison reference only; for formal procurement please rely on current quotations..

1Product Definition and Industry Overview

1.1 What it is: a trench cover is more than a plate

A "trench cover" (standard industry name: trench cover / drainage trench cover / pit cover, which, together with gully gratings (rainwater gratings) and manhole covers, belongs to the "municipal cover" product family) is a ground component installed over open drainage ditches, pits, cable trenches and rainwater inlets. It performs five functions simultaneously:

1.2 Classification Terminology Notes

The term "trench cover" varies by region: South China often calls it "ditch cover / pit cover", North China and procurement platforms mostly say "trench cover", while in standards it falls under "Inspection Manhole Covers" and rainwater inlet components. This report consistently uses trench cover (drainage trench cover) and covers its close product family: gully gratings, linear drainage channel covers, cable trench covers and concealed decorative covers.

Reader's tip: if your procurement/research targets a specific scenario (e.g., only municipal roads or only kitchen covers), you can jump directly to Section 7 Application Environment Classification, then return to Section 5 for process details of the corresponding material.

2Market Size, Drivers and Policy Background

2.1 Market Size (multiple scopes coexist; read as a range)

Narrow scope (trench covers/gully gratings only): Public sources generally state that the 2025 market size exceeded RMB 20 billion, with a CAGR of about 8%-10% over the past three years.
Broad scope (including manhole covers, rainwater inlets and all other municipal cover facilities): Other sources estimate the 2026 market at about RMB 45 billion. The difference mainly comes from statistical boundaries; we suggest using "the drainage cover family as a whole is in the RMB 20-45 billion range, growing at 8%-10%" as the judgment benchmark.

2.2 Demand-Side Drivers

1. New urbanization and urban renewal

Renewal procurement driven by municipal road reconstruction, back-street improvement, city health checks and manhole cover intact-rate assessments (>=98%).

2. Sponge City and flood control

Sponge City pilot promotion and waterlogging control requirements raise opening ratios and pollution interception capacity, driving high-drainage-efficiency covers and linear drainage systems.

3. Rainwater-sewage diversion and old-community renovation

Pipeline network renovation drives complete renewal demand for manhole covers, gully gratings and pit covers.

2.3 Supply-Side Characteristics

3Load Class Standard System (the First Yardstick of Selection)

The load classification of trench covers/manhole covers in China is mainly based on GB/T 23858-2009 "Inspection Manhole Covers" (currently valid, under revision consultation, project No. 20254870-T-333), whose classification is EN 124 consistent with the European standard; finished linear drainage channels mostly reference EN 1433. The six classes determine "where this cover can be installed":

ClassTest loadApprox. equivalent weight*Recommended application areas per national standardTypical procurement scenarios
A1515 kN≈ 1.5 tGreen belts, sidewalks and other areas closed to motor vehiclesGardens, pedestrian walkways, plaza edges
B125125 kN≈ 12.5 tSidewalks, non-motorized lanes, small-vehicle parking lots, underground garagesResidential communities, commercial pedestrian streets, park roads
C250250 kN≈ 25 tResidential communities, back streets, light motor vehicle lanes, within 0.5 m of curbsCommunity driveways, back streets, parking lots
D400400 kN≈ 40 tUrban arterial roads, highways, high-grade roads, expresswaysMunicipal arterial roads, viaducts, ordinary highways
E600600 kN≈ 60 tFreight stations, docks, airports and similar areasLogistics parks, port operation areas, airport freight lanes
F900900 kN≈ 90 tAirport runways and other special heavy-load areasAirport runways, special heavy-load workstations

*"Test load" is the static load value on a compression testing machine, not the same concept as "total vehicle weight" (heavy vehicle loads are distributed by axle); distinguish vendors' claims when requesting quotations.

Beyond the national standard, resin composite products also involve industry standards: CJ/T 121-2000 "Recycled Resin Composite Manhole Covers", CJ/T 211-2005 "Polymer-Based Composite Manhole Covers", JC/T 1009-2006 "Glass Fiber Reinforced Plastic Composite Manhole Covers"; steel gratings follow YB/T 4001 (steel grating) and hot-dip galvanizing follows ISO 1461 (zinc coating thickness); power cable trench covers often follow the power industry DL/T 802 series. Verify against the latest valid versions before use.

4Product Classification Framework (Material / Process / Environment, Three Dimensions)

Any trench cover can be positioned along three dimensions: what material it uses (determines the performance ceiling), how it is made (determines quality and cost), and where it is installed (determines load and appearance requirements). The three dimensions lock together, forming a complete selection coordinate.

Dimension 1 · By Material

Determines strength, corrosion resistance, weight, service life, recycling value and price band. Eight mainstream categories:

Ductile Iron Gray Cast Iron SMC/BMC Resin Composite FRP (Fiberglass Reinforced Plastic) Stainless Steel Galvanized Steel Grating Reinforced Concrete Plastics/derivatives

Dimension 2 · By Production Process

Casting (sand mold/lost foam) · compression molding (SMC/BMC, high temperature and pressure) · hand lay-up/pultrusion (FRP) · stamping/welding (stainless steel) · welding/press-locking + hot-dip galvanizing (steel grating) · prefabrication/cast-in-place (concrete) · injection molding (plastics).

Dimension 3 · By Application Environment

Municipal roads / slow traffic and landscape / communities and back streets / industry and logistics / airport-port heavy load / power cable trenches / food-pharmaceutical sanitary / chemical corrosive environments (see the selection matrix in Section 7).

Quick memory tip: For heavy load, think casting (ductile iron); for anti-theft, think composite (SMC); for hygiene, think stainless steel; for large openings, think steel grating; for budget and peace of mind, think concrete; for insulation, only resin-based materials.

5Mainstream Materials and Production Processes in Detail

This section breaks down the eight major categories in order of market popularity: material and grade → process flow → pros and cons → suitable environments → common specifications and price bands (prices are public online references for 2026).

Ductile Iron  5.1 Ductile Iron Trench Covers - the "Standard Answer" for Heavy-Duty Municipal Scenarios

Material and grades: Ductile iron (QT400-18 / QT450-10 / QT500-7, etc.; QT500-7 is common). Molten iron undergoes spheroidizing treatment (adding magnesium/rare-earth alloys) so graphite distributes spheroidally, giving tensile strength >=500 MPa and elongation >=7%, far better than the flake graphite structure of gray iron.

Production process flow:

Raw material batching (pig iron + scrap steel + returns)→ Medium-frequency furnace melting at about 1500°C→ Spheroidizing + inoculation→ Molding and core making (lost foam / sand mold / shell molding)→ Pouring and cooling→ Gate and riser removal · shot blasting→ (Optional) heat treatment / machining→ Surface coating (bituminous paint / epoxy / powder coating)→ Load testing before shipment

Process points: lost-foam casting (vaporized EPS patterns) offers good precision and appearance, suitable for batch standard parts; sand casting is flexible and suits irregular shapes; high-end products use anti-settlement tapered seating and embedded hinge structures to solve noise and settlement issues.

Advantages

  • High strength, good toughness, impact resistance and fatigue resistance under rolling, service life over 30 years
  • Covers all heavy-load classes D400-F900, suitable for almost all municipal scenarios
  • Mature anti-settlement structure (tapered seating); anti-theft locks/hinges can be fitted

Limitations

  • Heavy per piece (about 70-90 kg per linear meter), requiring mechanical assistance for transport and installation
  • Metal has recycling value, poor theft resistance, so locks or composite materials are needed
  • Relatively high price within its class; coastal/acid-rain areas need attention to coating quality

Typical Applications: Urban arterial roads, viaducts, expressways (D400); freight stations, docks, airport aprons (E600/F900); heavy-duty plant areas.

Price reference (per linear meter) : B125 class approx. RMB 280-320/m; D400 class approx. RMB 380-450/m. Common specs 300×500 to 600×800 mm, single or double grating optional.

Gray Cast Iron  5.2 Gray Iron Trench Covers - Traditional Mainstay, Being Gradually Replaced

Material: Gray iron (HT150/HT200/HT250). Flake graphite; compressive strength acceptable but tensile strength and toughness poor, highly brittle.

Process: mainly sand casting (similar to ductile iron but without spheroidizing/inoculation), usually coated with black bituminous paint for rust prevention.

Advantages

  • The cheapest metal cover, low unit price
  • Acceptable compressive capacity (light-to-medium loads)

Limitations

  • Visible rust in 5-10 years, short service life
  • High brittleness, prone to cracking and chipping under impact
  • Heavy + recycling value → prone to theft

Application and trend: Mostly used in low-end municipal maintenance, rural drainage and temporary works; its share is declining year by year amid urban renewal and material upgrades, being replaced by ductile iron and resin composites.Price Reference: Priced per piece (e.g., from RMB 45/piece), varying greatly by specification.

SMC/BMC Resin Composite  5.3 Resin Composite Trench Covers (Polymer Composite) - the "Light Cavalry" of Anti-Theft and Insulation

Material: Thermoset unsaturated polyester resin matrix + glass fiber reinforcement + mineral fillers (stone powder/quartz sand) + additives; steel reinforcement cages can be added for higher loads. Two types by reinforcement form:

Comparison ItemSMC (Sheet Molding Compound)BMC/DMC (Bulk/Dough Molding Compound)
FormSheet rolls with longer fibers (2.5-5 cm), interlaced distributionDough-like compound with chopped fibers (about 0.6-1.2 cm), random distribution
StrengthRelatively high, suitable for heavier loadsRelatively lower, mainly light-to-medium loads; heavy loads need steel reinforcement
Surface qualityGoodSmooth surface, full color, better appearance
CostHigherLower, cost-effective
Typical UsesPower/heavy-load composite covers, high-end export itemsGeneral-purpose covers for municipal, landscape and community use

Production process flow (high-temperature compression molding, one-step forming):

Batching of resin + glass fiber + filler + additives→ Kneading/impregnation into SMC sheets or BMC compound→ Cutting by weight · (steel reinforcement cage can be pre-embedded)→ Loading into molds→ Hydraulic compression molding at high temperature and pressure (140-160°C)→ Pressure holding and curing · demolding→ Trimming · inspection and shipment

Advantages

  • Naturally theft-proof: the material has almost no recycling value, with a theft rate near zero
  • Lightweight: about 1/3 the weight of cast iron of the same size; one person can carry and install it
  • Insulation (volume resistivity >=10^14 Ω·cm) and flame retardance (UL94 V-0 / B1), essential for power applications
  • Acid-alkali corrosion resistance, no rust, maintenance-free, service life 20-30 years
  • Customizable colors/textures, easy to blend with landscape paving; quiet and anti-jumping

Limitations

  • Limited long-term service temperature (generally <=80°C), not suitable for metallurgical high-temperature zones
  • Creep and sharp-impact resistance weaker than metal
  • Inferior products cut costs with recycled plastics/low resin content, resulting in poor strength and aging performance

Typical Applications: Residential communities, gardens and plazas, pedestrian walkways (A15-B125); with reinforcement, usable up to C250-D400 (community driveways); substations, cable trenches, communication base stations (insulation and flame retardance); chemical parks, coastal salt-spray areas. Also widely used for cable trench covers (30-40 mm thick indoors, 40-60 mm outdoors, 60-80 mm for heavy loads).

Price reference: BMC composite B125 class approx. RMB 200-240/m (600×1000×40); steel-reinforced D400 class approx. RMB 320-360/m; by area, ordinary composite covers approx. RMB 40-150/m² (thickness 30-50 mm), a 500×500 mm piece from about RMB 40-55.

FRP (Fiberglass Reinforced Plastic)  5.4 FRP (Fiberglass) Trench Covers / Gratings - the Specialist for Highly Corrosive Environments

Material: Glass fiber reinforced plastic (FRP, also known as "fiberglass"), unsaturated polyester/vinyl ester resin + glass fiber. Note: the market often conflates FRP with SMC/BMC as "resin covers"; both are thermoset fiber-reinforced composites, the main difference being molding process and fiber form.

Process routes (by product form):

Compression molding: sheets → high-temperature high-pressure molding (same as SMC, high strength)
Hand lay-up/spray-up: gel coat on mold → manual/spray lamination → roller debulking → room-temperature curing → demolding (small batches, irregular shapes)
Pultrusion: continuous glass fiber roving impregnated with resin → pulled through a heated die for curing → cut to length (grating bars/profiles)

Advantages

  • Outstanding acid-alkali and salt-spray resistance (vinyl ester resin is better), long service life
  • Non-conductive and non-heat-conductive; light (density about 1.8-2.0 g/cm³)
  • Pultruded gratings offer large openings and foot-traffic resistance, commonly used for wastewater plant/chemical plant trench covers

Limitations

  • Hand lay-up quality varies (worker-dependent); molded/pultruded products are stable but pricier
  • Stiffness lower than metal, with deflection under long-term heavy loads; dent resistance weaker than ductile iron
  • High temperature (>80°C long-term) and open-flame applications limited

Typical Applications: Wastewater treatment plants, chemical workshop trenches, electroplating/pickling lines, coastal high-salt-spray facilities, food and brewing, and other corrosive environments.Price Reference: Molded FRP B125 class approx. RMB 300-350/m; by area approx. RMB 50-200/m² (depending on resin type and thickness).

Stainless Steel  5.5 Stainless Steel Trench Covers - First Choice for Clean, Beautiful, Commercial and Sanitary Applications

Material: Stainless steel sheet (201 / 304 / 316). 201 is economical but with ordinary corrosion resistance (indoor use only recommended); 304 is the most common (food-grade basis); 316 contains molybdenum, resists chloride/seawater, for coastal and chemical use. Panel thickness is commonly 1.2-2.0 mm, and galvanized angle steel or stainless steel frames can be added.

Process route A - stamping and drawing (integrated covers):

Uncoiling and leveling→ Shearing and blanking→ Corner punching→ Punching (drainage holes/anti-slip holes)→ Hydraulic drawing (315-1000 t four-column press)→ Bending and flanging→ Surface treatment and shipment

Process route B - welded assembly (grating/framed covers): Laser/waterjet/plasma cutting → bending → TIG welding of bars and frames → grinding and polishing / pickling and passivation. Slot linear covers mostly use this route, with slot widths customizable (e.g., 8-15 mm).

Advantages

  • No rust, acid-alkali resistant, hygienic and easy to clean, long service life
  • Modern, refined appearance, suitable for high-end commercial, hotel and kitchen/bathroom spaces
  • Slot/concealed designs offer the best aesthetics in the industry; 304/316 suits food and pharmaceutical clean environments

Limitations

  • High price (304 is about 1.3-1.4x 201, 316 higher)
  • Thin sheet has limited load capacity; heavy-load areas need thicker panels with frames, or ductile iron
  • Surface scratches easily, so care is needed during construction

Typical Applications: Commercial districts, hotel lobbies, high-end communities, food processing plants, central kitchens, pharmaceutical workshops, laboratories, and kitchen/bathroom/changing-room trenches.Price Reference: 201 light-duty approx. RMB 260-300/m, 304 same spec approx. RMB 340-380/m (A15 class with frame).

Galvanized Steel Grating  5.6 Galvanized Steel Grating Trench Covers - the Industrial Drainage Mainstay with Large Openings and Long Spans

Material and structure: Q235 low-carbon steel flat bearing bars + round steel/twisted square cross bars, welded or press-locked orthogonally into a grating, then Hot-Dip Galvanizinghot-dip galvanized for corrosion protection (mean zinc coating >=80 μm). Specification codes such as G505/30/100: bearing bar 50 mm high × 5 mm thick, clear mesh opening 30×100 mm.

Production process flow:

Bearing bar/cross bar cutting and layout→ Resistance welding or press-locking→ Edge cutting · banding (frames)→ Hot-dip galvanizing (450°C zinc bath)→ (Optional) epoxy topcoat · hinges and locks→ Inspection and shipment

Advantages

  • Large opening ratio (40%-60%, drainage area much larger than cast iron gratings), extremely fast drainage and no ponding
  • Light weight (about 1/3 of cast iron), easy manual opening for maintenance, hinges can be added for theft prevention
  • High load capacity, suitable for long-span channels (e.g., G655 class for heavy loads)
  • Long life after hot-dip galvanizing (a compliant zinc coating lasts about 15 years+)

Limitations

  • Narrow bearing bars unsuitable for high heels/narrow wheelchair casters (small-clearance specs needed)
  • Carbon steel still rusts after the zinc coating wears; strongly corrosive environments need galvanized + epoxy or FRP
  • Less convenient than flat covers for winter snow/ice removal in northern regions

Typical Applications: Industrial workshop trenches, logistics warehouses, docks, municipal rainwater inlets, roadside ditches, parking lot drainage ditches, pump stations. The industrial belt is concentrated in Anping, Hebei (the "hometown of steel grating").

Price reference (per linear meter, hot-dip galvanized) : G505/30/100 approx. RMB 180-220/m; G655/30/100 approx. RMB 240-280/m; by area, B2B quotations approx. RMB 30-150/m² (scopes vary greatly, subject to specifications).

Reinforced Concrete  5.7 Reinforced Concrete Covers - the Economical, Zero-Theft "Honest Workhorse"

Material: C30-C50 concrete + steel reinforcement cage (HRB400 rebar, double-layer two-way Φ8-Φ12, spacing <=150 mm); impermeability grade P8; steel fiber/polypropylene fiber can be added for impact and crack resistance. Common thickness 60-100 mm+.

Production process:

Rebar processing and tying into cages→ Formwork (including drainage hole/anti-slip texture molds)→ Concrete mixing and pouring→ Vibratory compaction→ Steam or natural curing (>=28 days)→ Demolding · (surface coating/marking)→ Inspection and shipment

A few special scenarios use cast-in-place concrete (constructed integrally with the channel); large-span/heavy-load covers can use prestressed or steel-fiber mixes.

Advantages

  • Low cost (the lowest among all materials); raw materials readily available
  • Extremely heavy → nearly zero theft, worry-free long-term use
  • Good durability, compressive strength up to 30-50 MPa, service life 20-30 years+
  • The surface can be embossed with "rainwater/sewage/cable" markings for color-coded management

Limitations

  • Heavy weight (>100 kg/m²), transport breakage rate about 5%-8%, crane handling needed
  • Brittle; prone to chipping and cracking under repeated heavy-vehicle rolling (especially thin panels)
  • Difficult to open for maintenance; surface becomes slippery once the anti-slip texture wears
  • Non-insulating (use cautiously in power scenarios); northern freeze-thaw requires high frost-resistance grades

Typical Applications: Communities, sidewalks, green belts, non-motorized lanes (A15-B125); with thickening and reinforcement, up to C250-D400 (ordinary driveways, parking lots); municipal gardens.Price Reference: C30 B125 80 mm thick approx. RMB 120-150/m; precast concrete covers approx. RMB 50-200/piece depending on specification.

Plastics / derivatives  5.8 Plastic Gratings, Polymer Concrete Linear Drainage Channels and Concealed Decorative Covers

(1) UPVC/PP plastic gratings

Process: injection molding . Lightweight, cheap, corrosion-resistant and easy to color, but with low load capacity and weak UV aging resistance; mainly used for garden green belts, sports fields, temporary light drainage and agricultural irrigation channel covers.Price: A few to a few dozen RMB per piece.

(2) Polymer concrete linear drainage channels (prefabricated U-shaped channels + covers)

Polyester resin as binder and mineral aggregates as filler are cast into U-shaped channels, fitted with ductile iron/resin/slot stainless steel covers, forming a finished linear drainage system (per EN 1433). Advantages: smooth non-clogging inner walls, impermeable and corrosion-resistant, high cross-section drainage efficiency, fast construction - a growing category for commercial plazas and municipal road renovation. Channels are priced per meter (e.g., from RMB 30/m depending on spec), covers priced separately.

(3) Slot linear covers and concealed decorative covers

(4) Others

Polymer concrete faux-stone covers (patented and mass-produced since 2024), monitoring covers with smart sensors (liquid level/load, NB-IoT reporting, for waterlogging-pilot cities), etc. - differentiated new products.

6Comparison Table of Production Process Routes

MaterialCore processKey equipment/stepsQuality checkpointsOutput and scale
Ductile IronLost-foam / sand casting + spheroidizing and inoculationMedium-frequency furnace, core shooter/foam pattern, shot blasterNodularity >=85%-90%, spectrographic composition analysis, load testing for each batchLarge batches; automated lines can produce hundreds of thousands of pieces annually
Gray Cast IronSand castingCupola/medium-frequency furnace, sand molding lineUniform wall thickness, no shrinkage porosity or cracksLarge batches, low entry barrier (many workshops)
SMC/BMC ResinHigh-temperature high-pressure compression molding (one-step forming)Mixers, hydraulic presses (hundreds to thousands of tons), moldsResin/glass fiber ratio, mold temperature 140-160°C, pressure holding time; steel reinforcement positioningMold-defined shapes, high batch efficiency
FRP fiberglassCompression molding / hand lay-up / spray-up / pultrusionHydraulic press, or mold workshop, or pultrusion lineResin content, degree of curing; hand lay-up quality depends on laborMolding/pultrusion for batches; hand lay-up for small batches
Stainless SteelStamping-drawing, or laser cutting + bending + TIG weldingHydraulic presses, punch presses, laser cutters, bending machines, TIG weldingWeld quality, scratch-free surface, flatness, dimensional toleranceStamping for large batches of standard parts; welding for customization
Galvanized Steel GratingResistance welding / press-locking + hot-dip galvanizingWelding machines, galvanizing bath (450°C)Weld point strength, zinc coating >=80 μm (ISO 1461)Welded lines for large batches
Reinforced ConcretePrefabrication (forming-pouring-curing) / cast-in-placeMixing plants, vibrating tables, curing chambersReinforcement ratio, concrete grade, curing age >=28 daysPrefabrication plants for batches; requires site and curing time
Plastic gratingInjection moldingInjection molding machines + moldsMelt temperature, pressure holding, shrinkage and deformation controlVery high, multi-cavity molds
One-line judgment of process quality: For casting, check nodularity and nondestructive testing; for molding, check formulation and mold temperature; for welding, check seams and flatness; for galvanizing, check zinc thickness; for precast, check reinforcement and curing - low-price products almost always cut back on these "invisible steps".

7Application Environment Classification and Selection Matrix

Application environments are grouped into eight scenario families, with recommended solutions and key requirements, plus a material-by-scenario suitability matrix.

7.1 Eight Scenario Families → Recommended Solutions Quick Reference

Scenario familyTypical locationsRecommended load classPrimary solutionAlternative/notes
1. Municipal vehicle roadsArterial roads, viaducts, ordinary highways, expresswaysD400 / E600Ductile Iron (anti-settlement seating)F900 for heavy-load sections; anti-theft locks for critical roads
2. Slow traffic and landscapeSidewalks, pedestrian streets, parks, plazas, green beltsA15 / B125Stainless Steel / Resin compositeUse slot linear covers or concealed covers where landscape requirements are high
3. Communities and back streetsCommunity driveways, back streets and alleys, curb stripsB125 / C250Reinforced resin composite / concreteChoose resin for anti-theft priority; concrete for budget priority
4. Industry and logisticsWorkshop trenches, plant roads, warehouses, logistics parksC250–E600Galvanized Steel Grating (large openings)G655+ for heavy forklift areas; hinges for frequently opened maintenance covers
5. Airport and port heavy loadAirport runways, aprons, freight stations, dock yardsE600 / F900Ductile Iron (extra-heavy)Heavy steel grating also used; load test reports required
6. Power cable trenchesSubstations, cable trenches, communication wells, tunnel cable traysB125–D400SMC/BMC ResinInsulation, flame retardance and theft resistance required; per DL/T 802
7. Food and pharmaceutical sanitaryCentral kitchens, food plants, pharmaceutical workshops, laboratoriesA15–B125304/316 stainless steelSeamless and easy to clean, corrosion and rust resistant
8. Chemical corrosive environmentsChemical parks, wastewater plants, electroplating and pickling, coastal salt sprayB125–C250FRP / Resin composite / 316 stainless steelHeavy-load corrosive areas can use steel grating with galvanized + epoxy composite coating

7.2 Material-by-Scenario Suitability Matrix

Scenario \ MaterialDuctile IronGray Cast IronSMC/BMC ResinFRP fiberglassStainless SteelGalvanized Steel GratingReinforced Concrete
Municipal arterial roads / viaducts●●●●●○○●○
Sidewalks / pedestrian streets●●●●●●●●●●●●●
Gardens / plazas / landscape●○●●●●●●●●●
Communities / back streets●●●●●●●●●●●
Industrial plants / logistics●●●●●●○●●●●
Airports / ports, heavy load●●●○○○○●●○
Power cable trenches○*○●●●●●●○○○
Food / pharmaceutical clean areas○○●●●●●○○
Chemical / wastewater corrosive areas○○●●●●●●●*●*○

●●● First choice   ●● Suitable   ● Usable (conditional)   ○ Not recommended   *Cast iron is unusable in power scenarios (conductive); in chemically corrosive areas stainless steel must be 316, and steel grating needs a galvanized + epoxy composite coating.

8Market Price References and Life-Cycle Cost

Pricing is complex: "per linear meter / per square meter / per piece" coexist, affected by load class, size, surface treatment, quantity and transport radius. The table below shows public online reference prices for 2026 (tax included, delivered, batch >=100 m), for cross-comparison only.

8.1 Reference Price Comparison by Material

MaterialRepresentative spec / classReference price (RMB/m, linear meter)Reference price (RMB/m² or RMB/piece)Relative price level
Reinforced ConcreteC30, B125, 80 mm thick120–150Approx. RMB 200-500/m²; RMB 50-200/pieceEconomy
Galvanized Steel GratingG505/30/100 (hot-dip galvanized)180–220Approx. RMB 30-150/m² (scopes vary widely)Economy to mid-range
SMC/BMC Resin Composite600×1000×40, B125200–240RMB 40-150/m²; 500×500 pieces from about RMB 40-55Mid-range
Galvanized steel grating (heavy load)G655/30/100240–280—Mid-range
Stainless steel (201)1.5 mm panel + 40×40×4 angle steel frame, A15260–300—Medium-High
Ductile IronB125 class280–320Approx. RMB 45-150+/piece (spec varies widely)Medium-High
FRP molded fiberglassB125 class300–350RMB 50-200/m²Medium-High
Resin composite (steel-reinforced)600×1000×40, D400320–360—Medium-High
Stainless steel (304)Same spec as 201340–380—High-end
Ductile IronD400 class380–450—High-end

Note: B2B quotation scopes (ex-works/tax included/delivery included) differ greatly among vendors; the above are rough ranges cross-checked from multiple public sources and must not be used as contract prices.

8.2 Relative Price Chart (scale with 100 as maximum)

Concrete C30/B125≈ RMB 135/m
Steel grating G505≈ RMB 200/m
BMC composite B125≈ RMB 220/m
Stainless steel 201 light-duty≈ RMB 280/m
Ductile iron B125≈ RMB 300/m
FRP molded B125≈ RMB 325/m
Resin composite D400≈ RMB 340/m
Stainless steel 304 light-duty≈ RMB 360/m
Ductile iron D400≈ RMB 415/m

8.3 Often-Overlooked Cost Variables

8.4 Life-Cycle Cost Perspective (more important than unit price)

MaterialInitial unit priceMaintenance frequencyTypical service lifeTheft riskOverall assessment
Ductile IronHighLow (regular coating checks)30 years+High (lock needed)Best TCO for heavy-load scenarios
SMC/BMC ResinMediumVery low (maintenance-free)20-30 years≈0Best TCO for light-to-medium load scenarios
Stainless SteelHighLow20 years+Medium (201 has recycling value)First choice for sanitary/high-end scenarios
Galvanized Steel GratingMediumMedium (zinc coating needs monitoring)15 years+MediumBest drainage efficiency for industrial use
Reinforced ConcreteLowLow, but replacement cost after breakage is high20-30 years≈0Cost-effective for tight budgets and low loads
Gray Cast IronLowHigh (rust and replacement in 5-10 years)5-15 yearsHighActually the highest long-term cost; not recommended for new projects

9Industrial Clusters and Major Manufacturer Distribution

Trench cover production shows "one county, one industry" clustering; location often determines category advantage and delivered cost. The following are representative production regions and manufacturers compiled from public sources (for research leads only, not a recommendation).

9.1 Major Industrial Belts and Category Advantages

Production regionCategory advantagesRepresentative companies (public information)
Anping / Hengshui / Raoyang, HebeiSteel grating ("wire mesh hometown"), galvanized covers, resin composites, wire mesh productsHebei Shunkuo, Weijia Metal, Ouyi Technology, Shangjia/Jintuo steel grating companies, etc.
Xiangxiang / Changsha / Xiangtan / Zhuzhou, HunanDuctile iron, full-category supply, mature casting industry chainZhongxin Zhizao (Xiangxiang), Hunan Kangzhan, etc.
Hanshan (Lintou Town), Anhui"Casting hometown of East China", export base for ductile iron manhole covers/gully gratingsAnhui Feilong, Anhui Wuxing, Puruiming, etc.
Weifang / Zibo / Binzhou / Linyi, ShandongDuctile iron casting + resin composites (SMC/fiberglass)Luyang Casting (Weifang), Lurun Plastics/Yuefeng (Binzhou), Runxin (Zibo), etc.
Shanxi (Taigu, etc.)Time-honored casting base with large ductile iron capacityJinqiu Casting, etc.
Taizhou / Wuxi, JiangsuDuctile iron casting + steel gratingJiangsu Huazhan (Taizhou), Wuxi Shangjia, etc.
Wenzhou (Yongjia), ZhejiangStainless steel covers, exports and commercial real estate supplyHuate Casting, etc.
Wuhan, HubeiDuctile iron/composite manhole cover and gully grating brands, national channelsWuhan Lubao, etc.
Hangzhou, ZhejiangSMC composite manhole cover exportsHangzhou Jinmeng, etc.
Chengdu / Chongqing, Sichuan, and Hebei overflow plantsResin composites, regional supplySanliuwu, local distributor networks, etc.

9.2 Procurement Lead Suggestions

10Industry Trends and Structural Opportunities

1. Deepening material substitution

Ordinary gray iron is exiting rapidly; ductile iron share concentrates in heavy loads; resin composites penetrate from light loads into C250/D400 medium loads (upgraded formulations and reinforcement); stainless steel expands from high-end decoration to functional scenarios (kitchens/bathrooms, pharmaceuticals, coastal areas).

2. From "single products" to "finished drainage systems"

Complete delivery of polymer concrete U-shaped linear drainage channels + slot covers has become the mainstream design practice, replacing site-built brick channels - fast construction and high drainage efficiency, the fastest-growing segment.

3. Concealment and landscape integration

Municipal plazas and high-end real estate pursue integrated paving: concealed covers (steel frame + paved surface), composite covers with customizable colors and textures, and slot linear water collection continue to grow.

4. Sponge City + waterlogging control dividends

High-opening-ratio gratings, sediment interception baskets, fall-arrest net integrated covers, and "waterlogging-monitoring smart covers" (sensors + NB-IoT reporting of level/displacement) are seeing batch tenders in pilot cities.

5. Stricter safety supervision favors compliant manufacturers

Manhole cover intact-rate assessments (>=98%) and routine load sampling will eliminate "recycled material/thin-wall/low-grade" workshops, increasing the share of leading and compliant manufacturers.

6. Low carbon and circular economy

The high recycling value of ductile iron and recycled material circulation, plus reduced transport carbon emissions from lightweight composite covers, are becoming pluses in exports and large project bids.

11Procurement and Selection Pitfall-Avoidance Tips

11.1 Five-Step Decision Method

  1. Set the load class : determine the class against the table in Section 3 for the installation area (do not over-spec sidewalks, do not under-spec arterial roads);
  2. Choose the material : considering theft concerns (resin or concrete first for communities/unmanned areas), corrosive environments (chemical/coastal), hygiene requirements (food/pharmaceutical), and aesthetics (commercial landscape);
  3. Check the structure : rib layout, frame type, anti-slip texture, drainage hole size and opening ratio compliance;
  4. Verify the reports : require third-party load tests, nodularity/material certificates (cast iron), zinc coating thickness (steel grating), resin content and aging tests (composite);
  5. Calculate the total cost : unit price + transport + installation + maintenance + life span converted into life-cycle cost, not just the per-piece quote.

11.2 Six Typical "Pitfalls"

Common tacticHow to identify
Recycled pig iron / recycled plastics passed off as quality materialRequest material certificates and raw material source statements; check cross-section glass fiber content and color uniformity for composite covers
Inflated load class claims (vendor "80-ton truck" ≠ test load)Require reports per GB/T 23858 classes; reject "can pass an X-ton truck" talk
Thinned zinc coating / substandard galvanizingRequire hot-dip galvanizing thickness testing (>=80 μm), with sampling if necessary
Thin-wall downgrading (thinner cast iron/stainless steel)Weight comparison + caliper measurement of wall thickness, checked against spec sheets
Measurement-basis bait (mixing linear meters/m²/pieces)Fix "clear opening width × clear span × load class" in the inquiry; compare prices on a unified basis
Small workshops without testing capabilityVerify ISO 9001, third-party test reports and plant capacity; audit factories on site for major projects

12Appendix

12.1 Common Terms

TermMeaning
Trench cover / ditch coverPlate or grating components covering open drainage ditches and pits (the core subject of this report)
Gully grating (rainwater grating)Grating covering roadside rainwater inlets (curb catch basins), same family as trench covers
Manhole coverRound/square cover of underground pipeline inspection wells; shares the GB/T 23858 standard system
Opening ratio / porosityProportion of water-passing opening area to total cover area; determines drainage capacity
Test loadStatic load value (kN) applied by a compression testing machine; the calibration basis of load classification
NodularityDegree of graphite spheroidization in ductile iron; >=85%-90% is qualified (affects toughness)
SMC / BMC / DMCSheet / dough molding compounds - the three matrix forms of glass fiber reinforced thermoset composites
FRPGlass fiber reinforced plastic (fiberglass)
Lost-foam castingCasting process using vaporizable foam (EPS) patterns; high precision, suitable for batch parts
Linear drainage channelContinuous linear water-collection system of finished U-shaped channels + covers (EN 1433)
Concealed (decorative) coverCover whose surface can be inlaid with paving materials, visually integrated with the ground after installation

12.2 Major Standards List (subject to currently valid versions)

12.3 Information Sources and Disclaimer

This report is based on retrieval and cross-checking of public online channels (industry media, B2B platforms, company websites, encyclopedia entries, government procurement announcements, etc.) as of September 2026. Market size, price and manufacturer information involves multiple scopes and time sensitivity, and is for market research and selection reference only - not any procurement or investment advice; for formal decisions, please rely on current third-party test reports, manufacturer quotations and contract terms.

Related Links and Recommended Reading

Below are related technical resources and main site sections; you can return directly to the Anping Steel Grating Factory official website to continue selection.