Market Research Report
A systematic overview of mainstream trench cover product lines across three dimensions - material, production process and application environment - covering load classification, price references, industrial clusters and manufacturer distribution, industry trends and selection advice.
A "trench cover" (standard industry name: trench cover / drainage trench cover / pit cover, which, together with gully gratings (rainwater gratings) and manhole covers, belongs to the "municipal cover" product family) is a ground component installed over open drainage ditches, pits, cable trenches and rainwater inlets. It performs five functions simultaneously:
The term "trench cover" varies by region: South China often calls it "ditch cover / pit cover", North China and procurement platforms mostly say "trench cover", while in standards it falls under "Inspection Manhole Covers" and rainwater inlet components. This report consistently uses trench cover (drainage trench cover) and covers its close product family: gully gratings, linear drainage channel covers, cable trench covers and concealed decorative covers.
Renewal procurement driven by municipal road reconstruction, back-street improvement, city health checks and manhole cover intact-rate assessments (>=98%).
Sponge City pilot promotion and waterlogging control requirements raise opening ratios and pollution interception capacity, driving high-drainage-efficiency covers and linear drainage systems.
Pipeline network renovation drives complete renewal demand for manhole covers, gully gratings and pit covers.
The load classification of trench covers/manhole covers in China is mainly based on GB/T 23858-2009 "Inspection Manhole Covers" (currently valid, under revision consultation, project No. 20254870-T-333), whose classification is EN 124 consistent with the European standard; finished linear drainage channels mostly reference EN 1433. The six classes determine "where this cover can be installed":
| Class | Test load | Approx. equivalent weight* | Recommended application areas per national standard | Typical procurement scenarios |
|---|---|---|---|---|
| A15 | 15 kN | ≈ 1.5 t | Green belts, sidewalks and other areas closed to motor vehicles | Gardens, pedestrian walkways, plaza edges |
| B125 | 125 kN | ≈ 12.5 t | Sidewalks, non-motorized lanes, small-vehicle parking lots, underground garages | Residential communities, commercial pedestrian streets, park roads |
| C250 | 250 kN | ≈ 25 t | Residential communities, back streets, light motor vehicle lanes, within 0.5 m of curbs | Community driveways, back streets, parking lots |
| D400 | 400 kN | ≈ 40 t | Urban arterial roads, highways, high-grade roads, expressways | Municipal arterial roads, viaducts, ordinary highways |
| E600 | 600 kN | ≈ 60 t | Freight stations, docks, airports and similar areas | Logistics parks, port operation areas, airport freight lanes |
| F900 | 900 kN | ≈ 90 t | Airport runways and other special heavy-load areas | Airport runways, special heavy-load workstations |
*"Test load" is the static load value on a compression testing machine, not the same concept as "total vehicle weight" (heavy vehicle loads are distributed by axle); distinguish vendors' claims when requesting quotations.
Determines strength, corrosion resistance, weight, service life, recycling value and price band. Eight mainstream categories:
Ductile Iron Gray Cast Iron SMC/BMC Resin Composite FRP (Fiberglass Reinforced Plastic) Stainless Steel Galvanized Steel Grating Reinforced Concrete Plastics/derivativesCasting (sand mold/lost foam) · compression molding (SMC/BMC, high temperature and pressure) · hand lay-up/pultrusion (FRP) · stamping/welding (stainless steel) · welding/press-locking + hot-dip galvanizing (steel grating) · prefabrication/cast-in-place (concrete) · injection molding (plastics).
Municipal roads / slow traffic and landscape / communities and back streets / industry and logistics / airport-port heavy load / power cable trenches / food-pharmaceutical sanitary / chemical corrosive environments (see the selection matrix in Section 7).
Material and grades: Ductile iron (QT400-18 / QT450-10 / QT500-7, etc.; QT500-7 is common). Molten iron undergoes spheroidizing treatment (adding magnesium/rare-earth alloys) so graphite distributes spheroidally, giving tensile strength >=500 MPa and elongation >=7%, far better than the flake graphite structure of gray iron.
Production process flow:
Process points: lost-foam casting (vaporized EPS patterns) offers good precision and appearance, suitable for batch standard parts; sand casting is flexible and suits irregular shapes; high-end products use anti-settlement tapered seating and embedded hinge structures to solve noise and settlement issues.
Typical Applications: Urban arterial roads, viaducts, expressways (D400); freight stations, docks, airport aprons (E600/F900); heavy-duty plant areas.
Price reference (per linear meter) : B125 class approx. RMB 280-320/m; D400 class approx. RMB 380-450/m. Common specs 300×500 to 600×800 mm, single or double grating optional.
Material: Gray iron (HT150/HT200/HT250). Flake graphite; compressive strength acceptable but tensile strength and toughness poor, highly brittle.
Process: mainly sand casting (similar to ductile iron but without spheroidizing/inoculation), usually coated with black bituminous paint for rust prevention.
Application and trend: Mostly used in low-end municipal maintenance, rural drainage and temporary works; its share is declining year by year amid urban renewal and material upgrades, being replaced by ductile iron and resin composites.Price Reference: Priced per piece (e.g., from RMB 45/piece), varying greatly by specification.
Material: Thermoset unsaturated polyester resin matrix + glass fiber reinforcement + mineral fillers (stone powder/quartz sand) + additives; steel reinforcement cages can be added for higher loads. Two types by reinforcement form:
| Comparison Item | SMC (Sheet Molding Compound) | BMC/DMC (Bulk/Dough Molding Compound) |
|---|---|---|
| Form | Sheet rolls with longer fibers (2.5-5 cm), interlaced distribution | Dough-like compound with chopped fibers (about 0.6-1.2 cm), random distribution |
| Strength | Relatively high, suitable for heavier loads | Relatively lower, mainly light-to-medium loads; heavy loads need steel reinforcement |
| Surface quality | Good | Smooth surface, full color, better appearance |
| Cost | Higher | Lower, cost-effective |
| Typical Uses | Power/heavy-load composite covers, high-end export items | General-purpose covers for municipal, landscape and community use |
Production process flow (high-temperature compression molding, one-step forming):
Typical Applications: Residential communities, gardens and plazas, pedestrian walkways (A15-B125); with reinforcement, usable up to C250-D400 (community driveways); substations, cable trenches, communication base stations (insulation and flame retardance); chemical parks, coastal salt-spray areas. Also widely used for cable trench covers (30-40 mm thick indoors, 40-60 mm outdoors, 60-80 mm for heavy loads).
Price reference: BMC composite B125 class approx. RMB 200-240/m (600×1000×40); steel-reinforced D400 class approx. RMB 320-360/m; by area, ordinary composite covers approx. RMB 40-150/m² (thickness 30-50 mm), a 500×500 mm piece from about RMB 40-55.
Material: Glass fiber reinforced plastic (FRP, also known as "fiberglass"), unsaturated polyester/vinyl ester resin + glass fiber. Note: the market often conflates FRP with SMC/BMC as "resin covers"; both are thermoset fiber-reinforced composites, the main difference being molding process and fiber form.
Process routes (by product form):
Typical Applications: Wastewater treatment plants, chemical workshop trenches, electroplating/pickling lines, coastal high-salt-spray facilities, food and brewing, and other corrosive environments.Price Reference: Molded FRP B125 class approx. RMB 300-350/m; by area approx. RMB 50-200/m² (depending on resin type and thickness).
Material: Stainless steel sheet (201 / 304 / 316). 201 is economical but with ordinary corrosion resistance (indoor use only recommended); 304 is the most common (food-grade basis); 316 contains molybdenum, resists chloride/seawater, for coastal and chemical use. Panel thickness is commonly 1.2-2.0 mm, and galvanized angle steel or stainless steel frames can be added.
Process route A - stamping and drawing (integrated covers):
Process route B - welded assembly (grating/framed covers): Laser/waterjet/plasma cutting → bending → TIG welding of bars and frames → grinding and polishing / pickling and passivation. Slot linear covers mostly use this route, with slot widths customizable (e.g., 8-15 mm).
Typical Applications: Commercial districts, hotel lobbies, high-end communities, food processing plants, central kitchens, pharmaceutical workshops, laboratories, and kitchen/bathroom/changing-room trenches.Price Reference: 201 light-duty approx. RMB 260-300/m, 304 same spec approx. RMB 340-380/m (A15 class with frame).
Material and structure: Q235 low-carbon steel flat bearing bars + round steel/twisted square cross bars, welded or press-locked orthogonally into a grating, then Hot-Dip Galvanizinghot-dip galvanized for corrosion protection (mean zinc coating >=80 μm). Specification codes such as G505/30/100: bearing bar 50 mm high × 5 mm thick, clear mesh opening 30×100 mm.
Production process flow:
Typical Applications: Industrial workshop trenches, logistics warehouses, docks, municipal rainwater inlets, roadside ditches, parking lot drainage ditches, pump stations. The industrial belt is concentrated in Anping, Hebei (the "hometown of steel grating").
Price reference (per linear meter, hot-dip galvanized) : G505/30/100 approx. RMB 180-220/m; G655/30/100 approx. RMB 240-280/m; by area, B2B quotations approx. RMB 30-150/m² (scopes vary greatly, subject to specifications).
Material: C30-C50 concrete + steel reinforcement cage (HRB400 rebar, double-layer two-way Φ8-Φ12, spacing <=150 mm); impermeability grade P8; steel fiber/polypropylene fiber can be added for impact and crack resistance. Common thickness 60-100 mm+.
Production process:
A few special scenarios use cast-in-place concrete (constructed integrally with the channel); large-span/heavy-load covers can use prestressed or steel-fiber mixes.
Typical Applications: Communities, sidewalks, green belts, non-motorized lanes (A15-B125); with thickening and reinforcement, up to C250-D400 (ordinary driveways, parking lots); municipal gardens.Price Reference: C30 B125 80 mm thick approx. RMB 120-150/m; precast concrete covers approx. RMB 50-200/piece depending on specification.
Process: injection molding . Lightweight, cheap, corrosion-resistant and easy to color, but with low load capacity and weak UV aging resistance; mainly used for garden green belts, sports fields, temporary light drainage and agricultural irrigation channel covers.Price: A few to a few dozen RMB per piece.
Polyester resin as binder and mineral aggregates as filler are cast into U-shaped channels, fitted with ductile iron/resin/slot stainless steel covers, forming a finished linear drainage system (per EN 1433). Advantages: smooth non-clogging inner walls, impermeable and corrosion-resistant, high cross-section drainage efficiency, fast construction - a growing category for commercial plazas and municipal road renovation. Channels are priced per meter (e.g., from RMB 30/m depending on spec), covers priced separately.
Polymer concrete faux-stone covers (patented and mass-produced since 2024), monitoring covers with smart sensors (liquid level/load, NB-IoT reporting, for waterlogging-pilot cities), etc. - differentiated new products.
| Material | Core process | Key equipment/steps | Quality checkpoints | Output and scale |
|---|---|---|---|---|
| Ductile Iron | Lost-foam / sand casting + spheroidizing and inoculation | Medium-frequency furnace, core shooter/foam pattern, shot blaster | Nodularity >=85%-90%, spectrographic composition analysis, load testing for each batch | Large batches; automated lines can produce hundreds of thousands of pieces annually |
| Gray Cast Iron | Sand casting | Cupola/medium-frequency furnace, sand molding line | Uniform wall thickness, no shrinkage porosity or cracks | Large batches, low entry barrier (many workshops) |
| SMC/BMC Resin | High-temperature high-pressure compression molding (one-step forming) | Mixers, hydraulic presses (hundreds to thousands of tons), molds | Resin/glass fiber ratio, mold temperature 140-160°C, pressure holding time; steel reinforcement positioning | Mold-defined shapes, high batch efficiency |
| FRP fiberglass | Compression molding / hand lay-up / spray-up / pultrusion | Hydraulic press, or mold workshop, or pultrusion line | Resin content, degree of curing; hand lay-up quality depends on labor | Molding/pultrusion for batches; hand lay-up for small batches |
| Stainless Steel | Stamping-drawing, or laser cutting + bending + TIG welding | Hydraulic presses, punch presses, laser cutters, bending machines, TIG welding | Weld quality, scratch-free surface, flatness, dimensional tolerance | Stamping for large batches of standard parts; welding for customization |
| Galvanized Steel Grating | Resistance welding / press-locking + hot-dip galvanizing | Welding machines, galvanizing bath (450°C) | Weld point strength, zinc coating >=80 μm (ISO 1461) | Welded lines for large batches |
| Reinforced Concrete | Prefabrication (forming-pouring-curing) / cast-in-place | Mixing plants, vibrating tables, curing chambers | Reinforcement ratio, concrete grade, curing age >=28 days | Prefabrication plants for batches; requires site and curing time |
| Plastic grating | Injection molding | Injection molding machines + molds | Melt temperature, pressure holding, shrinkage and deformation control | Very high, multi-cavity molds |
| Scenario family | Typical locations | Recommended load class | Primary solution | Alternative/notes |
|---|---|---|---|---|
| 1. Municipal vehicle roads | Arterial roads, viaducts, ordinary highways, expressways | D400 / E600 | Ductile Iron (anti-settlement seating) | F900 for heavy-load sections; anti-theft locks for critical roads |
| 2. Slow traffic and landscape | Sidewalks, pedestrian streets, parks, plazas, green belts | A15 / B125 | Stainless Steel / Resin composite | Use slot linear covers or concealed covers where landscape requirements are high |
| 3. Communities and back streets | Community driveways, back streets and alleys, curb strips | B125 / C250 | Reinforced resin composite / concrete | Choose resin for anti-theft priority; concrete for budget priority |
| 4. Industry and logistics | Workshop trenches, plant roads, warehouses, logistics parks | C250–E600 | Galvanized Steel Grating (large openings) | G655+ for heavy forklift areas; hinges for frequently opened maintenance covers |
| 5. Airport and port heavy load | Airport runways, aprons, freight stations, dock yards | E600 / F900 | Ductile Iron (extra-heavy) | Heavy steel grating also used; load test reports required |
| 6. Power cable trenches | Substations, cable trenches, communication wells, tunnel cable trays | B125–D400 | SMC/BMC Resin | Insulation, flame retardance and theft resistance required; per DL/T 802 |
| 7. Food and pharmaceutical sanitary | Central kitchens, food plants, pharmaceutical workshops, laboratories | A15–B125 | 304/316 stainless steel | Seamless and easy to clean, corrosion and rust resistant |
| 8. Chemical corrosive environments | Chemical parks, wastewater plants, electroplating and pickling, coastal salt spray | B125–C250 | FRP / Resin composite / 316 stainless steel | Heavy-load corrosive areas can use steel grating with galvanized + epoxy composite coating |
| Scenario \ Material | Ductile Iron | Gray Cast Iron | SMC/BMC Resin | FRP fiberglass | Stainless Steel | Galvanized Steel Grating | Reinforced Concrete |
|---|---|---|---|---|---|---|---|
| Municipal arterial roads / viaducts | ●●● | ● | ● | ○ | ○ | ● | ○ |
| Sidewalks / pedestrian streets | ●● | ● | ●●● | ● | ●●● | ● | ●● |
| Gardens / plazas / landscape | ● | ○ | ●●● | ● | ●●● | ● | ● |
| Communities / back streets | ●● | ● | ●●● | ● | ● | ● | ●● |
| Industrial plants / logistics | ●●● | ● | ● | ● | ○ | ●●● | ● |
| Airports / ports, heavy load | ●●● | ○ | ○ | ○ | ○ | ●● | ○ |
| Power cable trenches | ○* | ○ | ●●● | ●●● | ○ | ○ | ○ |
| Food / pharmaceutical clean areas | ○ | ○ | ● | ● | ●●● | ○ | ○ |
| Chemical / wastewater corrosive areas | ○ | ○ | ●● | ●●● | ●●* | ●* | ○ |
●●● First choice ●● Suitable ● Usable (conditional) ○ Not recommended *Cast iron is unusable in power scenarios (conductive); in chemically corrosive areas stainless steel must be 316, and steel grating needs a galvanized + epoxy composite coating.
| Material | Representative spec / class | Reference price (RMB/m, linear meter) | Reference price (RMB/m² or RMB/piece) | Relative price level |
|---|---|---|---|---|
| Reinforced Concrete | C30, B125, 80 mm thick | 120–150 | Approx. RMB 200-500/m²; RMB 50-200/piece | Economy |
| Galvanized Steel Grating | G505/30/100 (hot-dip galvanized) | 180–220 | Approx. RMB 30-150/m² (scopes vary widely) | Economy to mid-range |
| SMC/BMC Resin Composite | 600×1000×40, B125 | 200–240 | RMB 40-150/m²; 500×500 pieces from about RMB 40-55 | Mid-range |
| Galvanized steel grating (heavy load) | G655/30/100 | 240–280 | — | Mid-range |
| Stainless steel (201) | 1.5 mm panel + 40×40×4 angle steel frame, A15 | 260–300 | — | Medium-High |
| Ductile Iron | B125 class | 280–320 | Approx. RMB 45-150+/piece (spec varies widely) | Medium-High |
| FRP molded fiberglass | B125 class | 300–350 | RMB 50-200/m² | Medium-High |
| Resin composite (steel-reinforced) | 600×1000×40, D400 | 320–360 | — | Medium-High |
| Stainless steel (304) | Same spec as 201 | 340–380 | — | High-end |
| Ductile Iron | D400 class | 380–450 | — | High-end |
Note: B2B quotation scopes (ex-works/tax included/delivery included) differ greatly among vendors; the above are rough ranges cross-checked from multiple public sources and must not be used as contract prices.
| Material | Initial unit price | Maintenance frequency | Typical service life | Theft risk | Overall assessment |
|---|---|---|---|---|---|
| Ductile Iron | High | Low (regular coating checks) | 30 years+ | High (lock needed) | Best TCO for heavy-load scenarios |
| SMC/BMC Resin | Medium | Very low (maintenance-free) | 20-30 years | ≈0 | Best TCO for light-to-medium load scenarios |
| Stainless Steel | High | Low | 20 years+ | Medium (201 has recycling value) | First choice for sanitary/high-end scenarios |
| Galvanized Steel Grating | Medium | Medium (zinc coating needs monitoring) | 15 years+ | Medium | Best drainage efficiency for industrial use |
| Reinforced Concrete | Low | Low, but replacement cost after breakage is high | 20-30 years | ≈0 | Cost-effective for tight budgets and low loads |
| Gray Cast Iron | Low | High (rust and replacement in 5-10 years) | 5-15 years | High | Actually the highest long-term cost; not recommended for new projects |
| Production region | Category advantages | Representative companies (public information) |
|---|---|---|
| Anping / Hengshui / Raoyang, Hebei | Steel grating ("wire mesh hometown"), galvanized covers, resin composites, wire mesh products | Hebei Shunkuo, Weijia Metal, Ouyi Technology, Shangjia/Jintuo steel grating companies, etc. |
| Xiangxiang / Changsha / Xiangtan / Zhuzhou, Hunan | Ductile iron, full-category supply, mature casting industry chain | Zhongxin Zhizao (Xiangxiang), Hunan Kangzhan, etc. |
| Hanshan (Lintou Town), Anhui | "Casting hometown of East China", export base for ductile iron manhole covers/gully gratings | Anhui Feilong, Anhui Wuxing, Puruiming, etc. |
| Weifang / Zibo / Binzhou / Linyi, Shandong | Ductile iron casting + resin composites (SMC/fiberglass) | Luyang Casting (Weifang), Lurun Plastics/Yuefeng (Binzhou), Runxin (Zibo), etc. |
| Shanxi (Taigu, etc.) | Time-honored casting base with large ductile iron capacity | Jinqiu Casting, etc. |
| Taizhou / Wuxi, Jiangsu | Ductile iron casting + steel grating | Jiangsu Huazhan (Taizhou), Wuxi Shangjia, etc. |
| Wenzhou (Yongjia), Zhejiang | Stainless steel covers, exports and commercial real estate supply | Huate Casting, etc. |
| Wuhan, Hubei | Ductile iron/composite manhole cover and gully grating brands, national channels | Wuhan Lubao, etc. |
| Hangzhou, Zhejiang | SMC composite manhole cover exports | Hangzhou Jinmeng, etc. |
| Chengdu / Chongqing, Sichuan, and Hebei overflow plants | Resin composites, regional supply | Sanliuwu, local distributor networks, etc. |
Ordinary gray iron is exiting rapidly; ductile iron share concentrates in heavy loads; resin composites penetrate from light loads into C250/D400 medium loads (upgraded formulations and reinforcement); stainless steel expands from high-end decoration to functional scenarios (kitchens/bathrooms, pharmaceuticals, coastal areas).
Complete delivery of polymer concrete U-shaped linear drainage channels + slot covers has become the mainstream design practice, replacing site-built brick channels - fast construction and high drainage efficiency, the fastest-growing segment.
Municipal plazas and high-end real estate pursue integrated paving: concealed covers (steel frame + paved surface), composite covers with customizable colors and textures, and slot linear water collection continue to grow.
High-opening-ratio gratings, sediment interception baskets, fall-arrest net integrated covers, and "waterlogging-monitoring smart covers" (sensors + NB-IoT reporting of level/displacement) are seeing batch tenders in pilot cities.
Manhole cover intact-rate assessments (>=98%) and routine load sampling will eliminate "recycled material/thin-wall/low-grade" workshops, increasing the share of leading and compliant manufacturers.
The high recycling value of ductile iron and recycled material circulation, plus reduced transport carbon emissions from lightweight composite covers, are becoming pluses in exports and large project bids.
| Common tactic | How to identify |
|---|---|
| Recycled pig iron / recycled plastics passed off as quality material | Request material certificates and raw material source statements; check cross-section glass fiber content and color uniformity for composite covers |
| Inflated load class claims (vendor "80-ton truck" ≠ test load) | Require reports per GB/T 23858 classes; reject "can pass an X-ton truck" talk |
| Thinned zinc coating / substandard galvanizing | Require hot-dip galvanizing thickness testing (>=80 μm), with sampling if necessary |
| Thin-wall downgrading (thinner cast iron/stainless steel) | Weight comparison + caliper measurement of wall thickness, checked against spec sheets |
| Measurement-basis bait (mixing linear meters/m²/pieces) | Fix "clear opening width × clear span × load class" in the inquiry; compare prices on a unified basis |
| Small workshops without testing capability | Verify ISO 9001, third-party test reports and plant capacity; audit factories on site for major projects |
| Term | Meaning |
|---|---|
| Trench cover / ditch cover | Plate or grating components covering open drainage ditches and pits (the core subject of this report) |
| Gully grating (rainwater grating) | Grating covering roadside rainwater inlets (curb catch basins), same family as trench covers |
| Manhole cover | Round/square cover of underground pipeline inspection wells; shares the GB/T 23858 standard system |
| Opening ratio / porosity | Proportion of water-passing opening area to total cover area; determines drainage capacity |
| Test load | Static load value (kN) applied by a compression testing machine; the calibration basis of load classification |
| Nodularity | Degree of graphite spheroidization in ductile iron; >=85%-90% is qualified (affects toughness) |
| SMC / BMC / DMC | Sheet / dough molding compounds - the three matrix forms of glass fiber reinforced thermoset composites |
| FRP | Glass fiber reinforced plastic (fiberglass) |
| Lost-foam casting | Casting process using vaporizable foam (EPS) patterns; high precision, suitable for batch parts |
| Linear drainage channel | Continuous linear water-collection system of finished U-shaped channels + covers (EN 1433) |
| Concealed (decorative) cover | Cover whose surface can be inlaid with paving materials, visually integrated with the ground after installation |
This report is based on retrieval and cross-checking of public online channels (industry media, B2B platforms, company websites, encyclopedia entries, government procurement announcements, etc.) as of September 2026. Market size, price and manufacturer information involves multiple scopes and time sensitivity, and is for market research and selection reference only - not any procurement or investment advice; for formal decisions, please rely on current third-party test reports, manufacturer quotations and contract terms.
Below are related technical resources and main site sections; you can return directly to the Anping Steel Grating Factory official website to continue selection.